|
Author
|
Message
|
|
MikeLongIsland
|
|
|
Group: Forum Members
Last Active: 15 Years Ago
Posts: 152,
Visits: 440
|
All these pretty engines on stands, hmmm, feel free to give me one for my truck, think of the xtra floor space you'd have
 I'm on a Lowwwww Budget
|
|
|
|
|
pintoplumber
|
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.0K,
Visits: 160.9K
|
Thanks guys, I was thinking more along the line of John's thinking. Two frames a foot apart or so. I guess it could be simpler.
 Dennis in Lititz PA
|
|
|
|
|
mctim64
|
|
|
Group: Forum Members
Last Active: 6 Years Ago
Posts: 2.4K,
Visits: 5.0K
|
Here's mine, very easy to make. 
 God Bless.  Tim http://yblockguy.com/
350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor
tim@yblockguy.com Visalia, California Just west of the Sequoias
|
|
|
|
|
Ted
|
|
|
Group: Administrators
Last Active: Yesterday
Posts: 7.4K,
Visits: 205.1K
|
|
|
|
|
|
LON
|
|
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 523,
Visits: 3.7K
|
Dennis Here is a rear view . Hope this helps . Lon
yblocksdownunder 
|
|
|
|
|
LON
|
|
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 523,
Visits: 3.7K
|
Dennis Here it is . Lon
yblocksdownunder
|
|
|
|
|
LON
|
|
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 523,
Visits: 3.7K
|
Dennis, I made up an engine cradle with some scrap 2 x 2 square box and some 2 inch angle iron . Not bad for an amature, even if I say so myself ?? Only took about 2 hrs one rainy Saturday afternoon .For some reason I can't load the photos ??? Lon
yblocksdownunder
|
|
|
|
|
charliemccraney
|
|
|
Group: Moderators
Last Active: Yesterday
Posts: 6.1K,
Visits: 442.1K
|
A pair of stands from Stumpy's Fabworks will be a good place to start. http://www.stumpysfabworks.zoomshare.com/0.html
Lawrenceville, GA
|
|
|
|
|
pintoplumber
|
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.0K,
Visits: 160.9K
|
John, I think it would be easier to build and weld angle iron than pipe. I'd bet the fittings would be costly too.
Dennis in Lititz PA
|
|
|
|
|
Hoosier Hurricane
|
|
|
Group: Moderators
Last Active: Yesterday
Posts: 3.7K,
Visits: 322.4K
|
Dennis: How about using materials related to your trade, like some 1 1/4 or 1 1/2 inch black pipe, various elbows, tees, and unions, etc. and making up a stand with maybe some flat plates welded in place for block and transmission (if used) mounts. In my mind, I see a couple of rectangular frames, one at ground level, the other elevated a foot or so with four "corner" posts. Just my 2 cents. Say "HI" to Cindy for me.
John - "The Hoosier Hurricane"
|
|
|
|