|
Group: Forum Members
Last Active: 18 minutes ago
Posts: 4.6K,
Visits: 37.9K
|
If your not in a hurry I would wait a while. Check older local boat yards etc.. The last two of these I got were free for the removal. These parts seem really high. Chuck
Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.
 
MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire
|
|
Group: Forum Members
Last Active: 7 hours ago
Posts: 3.7K,
Visits: 32.5K
|
You are referring to the intake manifold and rockers I assume?He was asking $275.00 OBO.I was really not sure what they were worth so I did not go any further than having a look at them.Interesting items.
 
|
|
Group: Forum Members
Last Active: 3 Months Ago
Posts: 1.0K,
Visits: 3.7K
|
Hey, I found more interesting Y-block boats from net  . http://www.fiberglassics.com/library/Arena_Craft http://www.arenacraft.com/ 
 Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)
|
|
Group: Forum Members
Last Active: 8 Years Ago
Posts: 138,
Visits: 6.3K
|
Boat?? Are you sure thats not a 56 Pontiac that made a wrong turn.
Ted, Redding, CA
|
|
Group: Forum Members
Last Active: 3 Months Ago
Posts: 1.0K,
Visits: 3.7K
|
Who really cares, as long as it has a Y-block inside of it  
Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 12 Years Ago
Posts: 24,
Visits: 349
|
I have a 292 dearborn marine in my 54 f250,62-64 block ECZ-G heads,used all stock truck parts,4bbl.A manifold,Reds headers,new rings,bearings,pistons.Runs great,57 dist.I had literature on these and they used 272-292 &312 blocks. the nasty ones were run in saltwater.stock block but I don't know if they used a different cam. RED
RED
|