• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Brake Light Switch

Brake Light Switch

Posted By MikeLongIsland 16 Years Ago

You don't have permission to rate!

Post Reply

Brake Light Switch

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
MikeLongIsland	Posted 16 Years Ago
Supercharged Group: Forum Members Last Active: 15 Years Ago Posts: 152, Visits: 440	I updated my brakes a bit using a power booster and 2 bay master, the original brake light switch had 2 wires, the new one only has one. Was the original supplying power and ground, and the new just ground? Mike  I'm on a Lowwwww Budget
	Reply Quote

Threaded View

Threaded View

Brake Light Switch By MikeLongIsland ( 16 Years Ago ) Both switches are simple single-pole on/off type switches. ... By HT32BSX115 ( 16 Years Ago ) Mike, do you want to save yourself some headaches? Mount a toggle... By simplyconnected ( 16 Years Ago ) Mike: If the one wire switch is screwed directly into the master... By Hoosier Hurricane ( 16 Years Ago ) You can install a T fitting in one of your lines which will allow you... By charliemccraney ( 16 Years Ago ) The switch is in the preportioning valve, and my reasearch says thats... By MikeLongIsland ( 16 Years Ago ) The brake switch doesn't go to ground. You should have a hot wire on... By charliemccraney ( 16 Years Ago ) Thanks for your help fellas ! I would say it's time to find a wiring... By MikeLongIsland ( 16 Years Ago ) Mike, that proportioning valve switch indicates a EMERGENCY... By simplyconnected ( 16 Years Ago ) You didn't say what year car you have, but if its a 50's/60's car it... By paul2748 ( 16 Years Ago ) It is is Fact a 1956 F100, and the original master has a 2 pole... By MikeLongIsland ( 16 Years Ago ) I have a friend with a Plymouth Duster with a slightly modified engine... By charliemccraney ( 16 Years Ago ) Did a bit of googling and came up with this, I believe problem is... By MikeLongIsland ( 16 Years Ago ) Then, what are you going to do with the proprotioning valve switch? By simplyconnected ( 16 Years Ago ) Mike: You don't have to use the prop valve switch at all, I don't... By Hoosier Hurricane ( 16 Years Ago ) Sounds Like a Plan, I actually was going to check the cluster if it... By MikeLongIsland ( 16 Years Ago ) [quote][b]MikeLongIsland (5/10/2009)[/b][hr] ...i imagine i could... By simplyconnected ( 16 Years Ago )

Post Reply

Back To Top

Reading This Topic