Group: Forum Members
Last Active: 9 Years Ago
Posts: 53,
Visits: 1.2K
|
I recently picked up a pallet load worth of y-block parts, including a short block and a bare block fresh from the machine shop), two pairs of heads (one pair ECZ-C has been cleaned, magnafluxed and all that) and a bunch of other useful parts like oil pans, timing covers, pistons, cams, valvetrain related stuff, etc. etc.
The other pair of heads have ECG-T cast into them. I looked on Mummert's ID chart and found nothing about ECG-T heads...
Anyone know anything about these?
Thanks --Matt
_____
Billerica, MA
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 53,
Visits: 1.2K
|
Anybody?
_____
Billerica, MA
|
Group: Forum Members
Last Active: 5 Years Ago
Posts: 1.8K,
Visits: 11.4K
|
Matt, that numbers got us stumped, how about rechecking it and maybe a photo to help. regards aussie bill.
AussieBill YYYY Forever Y Block YYYY Down Under, Australia
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 1.4K,
Visits: 7.5K
|
What size valves, head and stem? Pictures might help.
Glen Henderson
Freedom is not Free
Letohatchee, AL
|
Group: Forum Members
Last Active: Last Week
Posts: 912,
Visits: 7.5K
|
That's not a head I've ever seen. ECG-(anything) should be 1955 but -T is a new one. The date code should be on the side between the exhaust ports. That might help narrow it down. Lee Reese of Omaha is the true expert on 1955 casting numbers but I don't know if he is on this forum. John Mummert..... no time to work on my own Y-Blocks
http://ford-y-block.com 20 miles east of San Diego, 20 miles north of Mexico 
|
Group: Moderators
Last Active: Yesterday
Posts: 3.7K,
Visits: 322.9K
|
Could that "T" head be from an industrial engine?
John - "The Hoosier Hurricane"

|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 53,
Visits: 1.2K
|
I did a search on here before starting this thread and only two posts came up that even mentioned "ECG-T" heads. I think it was something about marine applications?
Anyways, I will get a closeup picture when I have my camera. I am positive its "ECG-T" though. I will try to get the date code too.
Thanks guys --Matt
_____
Billerica, MA
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 129,
Visits: 12.3K
|
Ford Cross Reference List gives for casting number ECG 6090T following part number, B6A-6049-M. That part number was not in car or truck part books. I will look it from my industrial engine parts book when I once again found that very easy to find and safe place where I put it. Cross Reference book cover looks like this:
Tero from Nurmijarvi, Finland56 Country Sedan, 61 F-100, 61 F-600, 55 F-620, 52 Mercury
|