Here are the results from the weekend. I was only 8 mph slower than the next class up.   Compare E/PP to D/PP.

http://www.scta-bni.org/El%20M...

88% of original size (was 574x16) - Click to enlarge   God Bless.   Tim                           http://yblockguy.com/

350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor

tim@yblockguy.com  Visalia, California    Just west of the Sequoias

Congrats to you both, looks like a whole lot of fun, I am thinking if i took my truck in a run, it would be dark by the time i got back to the start.

Mike

 I'm on a Lowwwww Budget

Corene and I have had a great opportunity to have a number of Y-Blockers visit while they were on the left coast.  Haven't met anyone who I wouldn't invite back.  If you come, we will treat you so many ways you are bound to like one of them (my dad's old saying).

Charlie Burns Laton, Ca (South of Fresno)

88% of original size (was 574x16) - Click to enlarge

BurnsRacing981@gmail.com

Charlie you are to nice.  First you give Tim an adrenaline rush of a life time and now you extend an invitation to us to come visit.  Better watch out you may have a big pit crew.  If CA was a lot closer to IN I would be there for sure.  Bing   

Warsaw, IN

Pete,

At the last race there were five spins and all stayed wheels down.  One of my friends went through the lights backwards at 207 mph.  Most of the cars with a low center of gravity would give the driver some confidence during a spin.  This 57 Ford pickup just doesn't qualify for a confidence builder.  If I were in a spin, I would definitely want an ejection seat!!!

Aussiebill,

Yes, I am listening.  I think Tim's adrenalin level is still quite high.  Actually, I am his biggest fan and nothing would make me happier than to see Tim's name in the record books too.  Don't worry, in pilot jargon, I'm still left seat.

Charlie Burns Laton, Ca (South of Fresno)

88% of original size (was 574x16) - Click to enlarge

BurnsRacing981@gmail.com

Hey Charlie, is that a "G" clamp on the rollbar [inline with Tim's shoulder] or is it the handle for the ejector seat??

Pete, one of the Aussie mob. Beechworth, Victoria60 F100 Panel Van, Y-block. 65 Galaxie Country Sedan 390

Oh my o my... Tim, I thought you're going to do 128 with that camper . Go for it, put a cage in you truck and challenge Charlie! You know, good competion gets the best results from the people...

88% of original size (was 574x16) - Click to enlarge Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)

Shhhhhhhhh! don't tell him, he might take the truck away from me.

88% of original size (was 574x16) - Click to enlarge   God Bless.   Tim                           http://yblockguy.com/

350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor

tim@yblockguy.com  Visalia, California    Just west of the Sequoias

Charlie, are you listening??

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

They are a bunch of great guys, I had a little trouble getting to run (missed the rookie meeting on Fri) and they fought for my right to run.  Also since I didn't get to run on Sat. one of the starters, you can see and hear him in the video, made sure I got two runs in on Sun.   I'm still going over each run in my head, I know just what I'm gonna do next May to break Charlies record. 

88% of original size (was 574x16) - Click to enlarge   God Bless.   Tim                           http://yblockguy.com/

350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor

tim@yblockguy.com  Visalia, California    Just west of the Sequoias