Profile Picture

shake down run... part 2

Posted By texasmark1 16 Years Ago
You don't have permission to rate!
Author
Message
texasmark1
Posted 16 Years Ago
View Quick Profile
Supercharged

Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)Supercharged (906 reputation)

Group: Forum Members
Last Active: 6 Years Ago
Posts: 650, Visits: 2.7K
Spent Christmas early afternoon driving the 57 Fairlane around town with my 14 year old son who has helped me tremendously in bringing this thing back together.  Still have doubts that I have it "dialed in" completly, and would appreciate some suggestions on a fix.  Here's the dope:

rebuilt 272; all back to stock...

rebuilt 2 bbl carb...

updated Petronix module and flame thrower...

starts up real easy, good oil pressure (60-plus at idle and during driving, dropping to 40-60 when warmed up; temp stays a steady 150-180)...

the concern: feels like its dragging a boat anchor; doesn't seem to want to accelerate; not a real "stumble" when accelerating, but just feels like it is "choked"; hits about 55 or so eventually, but won't do it at much more than a "gentle" pace...

wondering if my timing is off, perhaps... perhaps my carb needs to have the jets adjusted...

I know its not a race car, but it just ought to accelerate and run better... I'm sure of it...

am I dreaming? am I deluded? 

any ideas??  its sounds great thru new duals and glasspacks... just needs some more "oomph"... know what I mean??

help!

thanks,Mark

"God Bless Texas"location: Houston,TX


Threaded View

Threaded View
Forum Post shake down run... part 2 By texasmark1 ( 16 Years Ago )
Forum Post Timing means ALOT!!!!!!!!!!!!!!!!!!! Set timing at or about 10 to 12... By speedpro56 ( 16 Years Ago )
Forum Post Just wondering... what did you set your lash at? Brian By Noob ( 16 Years Ago )
Forum Post Mark: I don't remember details of your damper, but if it is original... By Hoosier Hurricane ( 16 Years Ago )
Forum Post Mark: OOOOPPPSS! I should have said turn the distributor CLOCKWISE... By Hoosier Hurricane ( 16 Years Ago )
Forum Post thanks for the ideas... new, rebuilt damper purchased from J Mummert,... By texasmark1 ( 16 Years Ago )
Forum Post Mark, I came in in the middle of this conversation so bear with... By Pete 55Tbird ( 16 Years Ago )
Forum Post damper mentioned refers to the harmonic balancer / crank pulley... By texasmark1 ( 16 Years Ago )
Forum Post Double check that the mechanical advance in the distributor is... By Ted ( 16 Years Ago )
Forum Post ok... first loosened and moved the dist "clockwise"; this increased... By texasmark1 ( 16 Years Ago )
Forum Post Mark The most cost effective way to FIX your distributor would be... By Pete 55Tbird ( 16 Years Ago )
Forum Post [quote][b]texasmark1 (12/27/2009)[/b][hr]....next, with timing light... By Ted ( 16 Years Ago )
Forum Post if I replace with the new one as Pete suggests, will my Petronix... By texasmark1 ( 16 Years Ago )
Forum Post sounds like its gotta come out, so believe I'll try the fix first...... By texasmark1 ( 16 Years Ago )
Forum Post As said before it is easy to just buy a new rebuilt one but I think... By mctim64 ( 16 Years Ago )
Forum Post Mark - There are two mechanical systems to work on within the... By GREENBIRD56 ( 16 Years Ago )
Forum Post even more "thanks" for the ideas/suggestions... if the weather holds,... By texasmark1 ( 16 Years Ago )
Forum Post so, I'm ready to pull the dist., do some clean up as suggested above;... By texasmark1 ( 16 Years Ago )
Forum Post That's where I would put it too be on the safe side. By speedpro56 ( 16 Years Ago )
Forum Post Mark: Nothing wrong with Gary's method. Personally, I turn the... By Hoosier Hurricane ( 16 Years Ago )
Forum Post Mark, all the guys suggestions are great, i could only suggest to also... By aussiebill ( 16 Years Ago )
Forum Post ok, ate my black eyed peas, cabbage and even mustard greens for lunch... By texasmark1 ( 15 Years Ago )
Forum Post [quote][b]texasmark1 (1/1/2010)[/b][hr] but I cannot get the breaker... By marvh ( 15 Years Ago )
Forum Post nope... not quite; the only screws are the ones that the ground wire... By texasmark1 ( 15 Years Ago )
Forum Post I thought you had the early distributor when you mentioned the plate... By marvh ( 15 Years Ago )
Forum Post stand by while I eat some more black eyed peas...! By texasmark1 ( 15 Years Ago )
Forum Post Mark: A little heat from a propane torch or a heat gun around the... By Hoosier Hurricane ( 15 Years Ago )
Forum Post pics of the dist. not even sure this is "original"... By texasmark1 ( 15 Years Ago )
Forum Post That is the early 57 distributor that has the breaker plate running in... By marvh ( 15 Years Ago )
Forum Post I had the same sort of problem a while back in my 58 Villager wagon,... By rmk57 ( 15 Years Ago )
Forum Post new tank, cleane out line from front to back, new filter installed, no... By texasmark1 ( 15 Years Ago )
Forum Post Well, if all the fuel systems new and checked out then it sounds like... By rmk57 ( 15 Years Ago )
Forum Post thanks Randy; are there any pics of your black 57 that I could check... By texasmark1 ( 15 Years Ago )
Forum Post Mark - Don't give up too quick on your dizzy - they can be doctored... By GREENBIRD56 ( 15 Years Ago )
Forum Post ok, hammer and nail and the breaker plate is out... now that I cen... By texasmark1 ( 15 Years Ago )
Forum Post Mark:

That distributor is very expensive to rebuild as...
By marvh ( 15 Years Ago )
Forum Post [quote][b]marvh (1/2/2010)[/b][hr]Mark: That distributor is very... By aussiebill ( 15 Years Ago )
Forum Post Marv, no argument from me on the costs of things; MSD is beyond my... By texasmark1 ( 15 Years Ago )
Forum Post Mark:

The weights can be unfrozen, remove the wick then...
By marvh ( 15 Years Ago )
Forum Post Make sure the springs are in good shape. When checking to see if the... By speedpro56 ( 15 Years Ago )
Forum Post believe I'm almost there; tried to get that dang little clip out of... By texasmark1 ( 15 Years Ago )
Forum Post Mark: Don't give up now, you're almost there. The cam may be stuck... By Hoosier Hurricane ( 15 Years Ago )
Forum Post wait... the upright "legs" on that little clip should be spread apart,... By texasmark1 ( 15 Years Ago )
Forum Post [quote][b]texasmark1 (1/2/2010)[/b][hr]wait... the upright "legs" on... By marvh ( 15 Years Ago )
Forum Post Bill:

The only place I have seen those distributors with...
By marvh ( 15 Years Ago )
Forum Post dang, I just realized that I have an "audience" for this problem...... By texasmark1 ( 15 Years Ago )
Forum Post You can check the weight movement by clamping the distributor in a... By marvh ( 15 Years Ago )
Forum Post success! with the help of my 14 yr old son (my #1 mechanic!), got the... By texasmark1 ( 15 Years Ago )
Forum Post Mark: The wicks are made of a pretty loose felt. The one on top is... By Hoosier Hurricane ( 15 Years Ago )
Forum Post well, if I wasn't a Texan, your suggestion about "whippin' a cowboy... By texasmark1 ( 15 Years Ago )
Forum Post [quote]well, if I wasn't a Texan, your suggestion about "whippin' a... By Bobwanna ( 15 Years Ago )
Forum Post Mark if you need some hat felt, I can send you some no problem!! Thats... By Unibodyguy ( 15 Years Ago )
Forum Post [quote][b]texasmark1 (1/3/2010)[/b][hr]...guess I'll just have to get... By bloodyknucklehill ( 15 Years Ago )
Forum Post thanks for the offer, pard! I'll graciously accept your gracious... By texasmark1 ( 15 Years Ago )
Forum Post ok, got the weights freed up and operating... took the plunge and... By texasmark1 ( 15 Years Ago )
Forum Post Mark: As long as the arm can move freely, and the points open when... By Hoosier Hurricane ( 15 Years Ago )
Forum Post The curved arm advance will not fit a distributor needing the straight... By marvh ( 15 Years Ago )
Forum Post Mark - Is the vacuum pot you've got ruined? As in leaking - or stuck... By GREENBIRD56 ( 15 Years Ago )
Forum Post Here is a picture of the two distributor with the curved arm and... By marvh ( 15 Years Ago )
Forum Post Marv, responded to your PM before checking for the latest remarks to... By texasmark1 ( 15 Years Ago )
Forum Post got the last of the clean up done this p.m. and pieces back... By texasmark1 ( 15 Years Ago )
Forum Post A buddy of mine did a welding job down at Longview - and when he got... By GREENBIRD56 ( 15 Years Ago )
Forum Post Pressed beaver... hum... are you sure he was in Longview, TEXAS!!?? By texasmark1 ( 15 Years Ago )
Forum Post -dist back together after clean up -reinstalled on engine, along with... By texasmark1 ( 15 Years Ago )
Forum Post Okay Mark, sorry about the delay, the Beaver is in transit!! Should... By Unibodyguy ( 15 Years Ago )
Forum Post cool! I ended up using some "craft store" felt (Ford Red, of course)... By texasmark1 ( 15 Years Ago )


Reading This Topic


Site Meter