Profile Picture

57 ford custom 300 front suspension

Posted By michael t. 16 Years Ago
You don't have permission to rate!

57 ford custom 300 front suspension

Author
Message
michael t.
Posted 16 Years Ago
View Quick Profile
Hitting on all eight cylinders

Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)Hitting on all eight cylinders (6 reputation)

Group: Forum Members
Last Active: 14 Years Ago
Posts: 6, Visits: 128
Has anyone put mustang II front end in a 57 passenger car ? If so is the swap worth the time and money?If you are running a y block do you have to use a rear sump pan?I have seen the rack&pinion kits but,I'm not sure if I like the rack being behind the cross member because the steering column angle and clutch linkage clearance.Any help would be appreciated.               thanks    michael t.

Michael t.

Threaded View

Threaded View
Forum Post 57 ford custom 300 front suspension By michael t. ( 16 Years Ago )
Forum Post I remember there was a thread on this topic on 57fordsforever.com . I... By rmk57 ( 16 Years Ago )
Forum Post Hey Michael, As to your questions on rack/pinion steering--I have a... By kidcourier ( 16 Years Ago )
Forum Post [quote][b]michael t. (12/31/2009)[/b][hr]Has anyone put mustang II... By Doug T ( 16 Years Ago )
Forum Post I have the original steering in my 57 custom business sedan 2dr and it... By speedpro56 ( 16 Years Ago )
Forum Post As for why you'd replace a perfectly goo dsystem, maybe the car was a... By Flying Jester ( 16 Years Ago )
Forum Post I think what the Kid said makes a lot of sense because some of the... By speedpro56 ( 16 Years Ago )
Forum Post I'm with Doug T & Speedpro ,replace everything that is worn ,add disc... By LON ( 16 Years Ago )
Forum Post Lon, Ditto!! bit off topic but how did you go with santa ( lynne) this... By aussiebill ( 16 Years Ago )
Forum Post Michael -I like to keep my cars close to stock so that that it easy... By Bobwanna ( 16 Years Ago )
Forum Post When I redid my 56 Victoria I thought about Mustang II and everything... By MoonShadow ( 15 Years Ago )
Forum Post MoonShadow I like to keep things close to stock unless I really know... By Bobwanna ( 15 Years Ago )
Forum Post In my 56 Customline, I did keep the stock suspension (except for the... By Rono ( 15 Years Ago )
Forum Post I used the 1" blocks that space the coil spring plate lower in the... By MoonShadow ( 15 Years Ago )
Forum Post I'm not sure why there was no effect on the alignment. Maybe on of the... By Doug T ( 15 Years Ago )
Forum Post I used the 1" blocks that space the coil spring plate lower in the... By Bobwanna ( 15 Years Ago )
Forum Post Actually my car was lowered about 2" with this method. Chuck in NH By MoonShadow ( 15 Years Ago )
Forum Post The only reason I was thinking of changing to a Mustang II front end... By michael t. ( 15 Years Ago )
Forum Post Just remember the MII stuff was designed for a Pinto, probably about a... By Hoosier Hurricane ( 15 Years Ago )
Forum Post The 57 front ends were strong & well designed. In good condition they... By PF Arcand ( 15 Years Ago )
Forum Post a couple of people have said something about 1" control arm spacers... By michael t. ( 15 Years Ago )
Forum Post Michael: Only works on '54-'56 passenger and '55-'57 T-Bird. '57... By Hoosier Hurricane ( 15 Years Ago )


Reading This Topic

Site Meter