Data plate rivets?

Author	Message
MG Cook	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 12 Years Ago Posts: 176, Visits: 731	Where can you purchase the correct rivets to install the data plate ? , I tapped one too hard while installing and screwed it up. Only two was shipped with my new plate. Claim to fame is the car was used as an extra in the movie Diner with Micky Rourke, Steve Gootenburg, Paul Riser and Kevin Bacon.
	Reply Quote
RodgerF	Posted 15 Years Ago
Normally aspirated Group: Forum Members Last Active: 11 Years Ago Posts: 32, Visits: 2.2K	There's company on ebay that sells them along with a special punch to install them. I bought a set from them along with the tool but I can't remember their name. Rodger
	Reply Quote
rgrove	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 4 Years Ago Posts: 498, Visits: 3.5K	I think tee-bird products & macs sell them also Ron Grove Wauconda, IL
	Reply Quote
Noob	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 10 Years Ago Posts: 158, Visits: 1.8K	Check AMK Fasteners http://www.amkproducts.com/ ... that's where I got mine... no tool needed really, just a wooden dowel worked for me... AMK has a whole bunch of vintage correct fasteners and clips and straps and etc... Brian Cylinder Index = 84 Current Experiment = `57 Tbird, Grand Rapids, Michigan
	Reply Quote
paul2748	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 5 hours ago Posts: 3.6K, Visits: 497.7K	Try A.G. Backeast. He sell new data plates www.datatags.com 54 Victoria 312; 48 Ford Conv 302, 56 Bird 312 Forever Ford Midland Park, NJ
	Reply Quote
oldcarmark	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: Last Month Posts: 3.7K, Visits: 32.6K	MG!Why dont you ask the supplier of your plate to send you a couple more?
	Reply Quote
sofob0909	Posted 15 Years Ago
Hitting on all eight cylinders Group: Forum Members Last Active: 15 Years Ago Posts: 14, Visits: 22	hey guys. I am going to be getting my truck transfered over to my name soon. (not registered just title transfer) Anyway here is delaware they said that i had to have the data plate on the truck. This is a problem because the cab has been primered and the plate was taken off by the precious owner. I talked to the guys in the inspection lane. They said i had to have the origional rivets. They said this was to prevent theft. well long story short, i dont have the rivets. What to do??? Stephen OFOB college student Charlotte NC, Wilmington DE
	Reply Quote
ecode ragtop	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 5 Years Ago Posts: 285, Visits: 3.4K	also try marti auto works www.martiauto.com , they have the rivets. hope this helps TOM DRUMMOND MIDWEST DIRECTOR 57 FORDS INTERNATIONAL JUST A MIDNIGHT CRUISE DOWN THUNDER ROAD!!! TOM DRUMMOND MIDWEST DIRECTOR 57 FORD INTERNATIONAL
	Reply Quote
MG Cook	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 12 Years Ago Posts: 176, Visits: 731	I ended up going back to A.G. Backseat and he sent me one, he charges $2.50 each for a set of two if anyone needs them. Claim to fame is the car was used as an extra in the movie Diner with Micky Rourke, Steve Gootenburg, Paul Riser and Kevin Bacon.
	Reply Quote
paul2748	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 5 hours ago Posts: 3.6K, Visits: 497.7K	sofob0909 (3/9/2010) hey guys. I am going to be getting my truck transfered over to my name soon. (not registered just title transfer) Anyway here is delaware they said that i had to have the data plate on the truck. This is a problem because the cab has been primered and the plate was taken off by the precious owner. I talked to the guys in the inspection lane. They said i had to have the origional rivets. They said this was to prevent theft. well long story short, i dont have the rivets. What to do??? I would get the new rivets and then distress them to make them look old. 54 Victoria 312; 48 Ford Conv 302, 56 Bird 312 Forever Ford Midland Park, NJ
	Reply Quote

Data plate rivets?

Data plate rivets?

Reading This Topic