Ok so i just discovered the megasquirt EFI controllers. for those of you who havnt heard of them they sell kits where you can basically build your own EFI computer and they are totally tunable. So that got me to thinking about a Multi-port fuel injected 292. Noramally im against electronic crap but for everyday driver efficiency(or super high performance) it could see merit. So i thought i would start this thread and throw out an ideal about how to build such a system and see what if there is any interest.



So first of all you would need the electronics.

1. mega-squirt controller

2. mega-squirt relay board

3. wiring/sensors/etc.

then the other parts

1.throttle body (5.0 ford?)

2.injectors

3.intake(possible take a mummert alum and drill and bung for injectors and adapt throttle body?)

4fuel system





There many more aspect of a system like this but this is a jumping off point for a discussion at least. i realize the modified intake might not be as good as a custom one but for an everyday driver i think it would work just fine by taking and drilling and welding in bungs in each of the runners to allow to put in 8 injectors. this would make for a pretty reasonably priced injected system as apposed to 2-6 grand for one. So what do you guys think