Here is my plan I need input if it is doable. I plan to use a Bendtsen's adapter and install a ford aod transmission, 9 inch with 3:50 gears and trac loc.
1. Bore to 3.860 , splurge on Mummert's forged dome pistons. I would like to end up with
9:1 comp. Can I use the c1te rods or use 312 rods (which I Have.) Balance the rotating assy.
2. Mummerts Y-270s cam and lifter kit.
3. I have a good used set of high ratio rockers. Can I use my stock push rods?
4. How big of an intake valve can I put in the c1te heads without creating too much shroading of the valve.
Do I need to do any more machining on the heads other than opening up the ports a little.
5. I plan to use a edelbrock 273, 3x2 with 94's and progressive linkage. I know a four barrell would probably perform better and be less hassell but the 3-2's look so cool.
"Anything worth having is worth working for"