56 Ford Victoria pinion seal replacement

Posted By Dave V 15 Years Ago

You don't have permission to rate!

Author	Message
Dave V	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 13 hours ago Posts: 234, Visits: 41.4K	I changed the pinion seal on my 56 Victoria a while ago and tightened the yoke back to where it was originally by scribing marks on the nut and shaft. Now it started to loosen up and making a slight growling noise. Is there a certain procedure to set the preload on the pinion bearing. Thanks Dave SE Wis
	Reply Quote

Threaded View

56 Ford Victoria pinion seal replacement By Dave V ( 15 Years Ago )

There is a crush sleeve behind the bearing that will need to be... By Ol'ford nut ( 15 Years Ago )

I have heard of a crush sleeve. Is that obtainable from NAPA and do... By Dave V ( 15 Years Ago )

[quote][b]Ol'ford nut (9/12/2010)[/b][hr][quote][b]55courier... By 55courier ( 15 Years Ago )

[quote][b]Dave V (9/12/2010)[/b][hr]I have heard of a crush sleeve. Is... By Ted ( 15 Years Ago )

Thanks again for the info. I'm sure this will help me. Dave By Dave V ( 15 Years Ago )

Worked at Ford dealers for 40+ years and have replaced my share of... By lowrider ( 15 Years Ago )