What numbers do I need to get a set of Moly rings for a std bore 292? 5/64 5/64 3/16

Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Chuck:

Are you sure they are 5/64 on both compression rings?  Original Y pistons are 5/64, 3/32, and 3/16.  If they are as you say, 265 scrub rings should fit your needs.  I don't have a number offhand.

John - "The Hoosier Hurricane"

john your thinking of the 312.292 were both 5/64.the 265 is the same.i have an old hastings ring book which comes in handy at swap meets.the 303 olds,287 pont,290-304 amc are just some of the engines that use 292 rings.

314:

Thanks for straightening me out on ring widths.  Been too long since I built a 292 I guess.

John - "The Hoosier Hurricane"

Chuck, the number you need is 619 596 0312

http://ford-y-block.com 

20 miles east of San Diego, 20 miles north of Mexico