NAPA has them. Around $45 + CORE. NAPA # WP 58235. If your store doesn't have it order it online.

Doing Fords for 45 years. '56 Customline Victoria

E.J. in Havana FL

I just bought a rebuild kit from MACs and will rebuild mine.



It will be used without the fan mounting flange that is pressed on the front and instead will have a taper-fit pulley and bushing installed. I may need to cut a keyway in the shaft for the bushing (although I believe it might not need it)



Macs sells the rebuild kits for about $15 + shipping.





The "High-mount" truck pumps are a LOT more scarce!



If you need one of those for a 272/292, PM me.



I have a new (A1 Cardone rebuilt) that I decided not to use. (+ high mount fan, bearing, damper, etc)





Cheers,





Rick





Oh, and btw, Rock Auto still has A1 Cardone reman pumps for Y-blocks http://www.rockauto.com/catalog/









All the prices are + shipping.








-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!

---------------------
This post was created using OpenSuSE Linux x64 and Firefox

maybe the price will be a little high due to import taxes/freight, etc, but new pumps are still being made here in Brasil, and Argentina, and by the original Ford suplyer (URBA). The pumps are high quality with ceramic seals, like the modern car pumps. Due to the demand around here, I doubt we will ever be out of water pumps The truck versions can be sent to the factory to be restored. If the producers in the United States ever quit doing those parts, you will have a alternate source for quality new ones.

Yiu can find URBA pumps at the new Ford Fiesta's engines, that are made in Brazil for the world market, so it's a OEM quality manufaturer.

Túlio Lazzaroni "FORD", Florianópolis SC Brasil.

'74 Ford Galaxie 500 292 V8

'82 Ford Galaxie Landau 302 V8

'98 Chevrolet S10 4.3 V6

'01 Ford Focus 1.8 Zetec

Very good to know!

Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.

Thanks John! Guess I'll have to go re-built :-)

Gerald Ingram aka "Gritsngumbo"
Monroe, LA
LITTLE RED: 64 Ford F100 Short Bed Styleside
BIG RED: 63 Ford F100 Long Bed Unibody
BBW RED: 61 Ford F100 BBW Long Bed Custom Cab Unibody
BIG “UN: 63 F250 Longbed Flareside
CREW CAB: 63 F100 "Stageway" Crew Cab w/Long "Wrong" Bed

None of the truck water pumps are in still being made new. Yours must be rebuilt. Frank Rice is not making aluminum water pumps now.

New iron car pumps are still available, for now.

http://ford-y-block.com 

20 miles east of San Diego, 20 miles north of Mexico

I have always relied on the local NAPA store and they let me down today. Maybe I'll give them another shot and ask for one for a 62. Think I've found one at EGGE, but I'll have to call in the morning and confirm.

Edit: I just checked NAPA online and one for a 62 popped up. Re manufactured only, no new one's. I might have to settle.

Gerald Ingram aka "Gritsngumbo"
Monroe, LA
LITTLE RED: 64 Ford F100 Short Bed Styleside
BIG RED: 63 Ford F100 Long Bed Unibody
BBW RED: 61 Ford F100 BBW Long Bed Custom Cab Unibody
BIG “UN: 63 F250 Longbed Flareside
CREW CAB: 63 F100 "Stageway" Crew Cab w/Long "Wrong" Bed

Did you check your local parts store. Y's were used up to 64 in trucks. As for a 62-64 F100.

54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

If you take yours to NAPA, they can send it on to Cardone to be remanufactured. /Duck

BOO- YA!!!

I bought one at NAPA a couple of years ago. The NAPA

store on Louisville Ave. IN Monroe, La.

55f100

West Monroe,La.