Hitting on all eight cylinders
Group: Forum Members
Last Active: 15 Years Ago
Posts: 7,
Visits: 8
|
hahaa i was pretty dman sure the 239 intake gaskets had to be different due to the port size. just ordered a set off of napa. thanks guys
|
|
Group: Moderators
Last Active: Yesterday
Posts: 3.7K,
Visits: 322.9K
|
Whoa, I took in too much territory when I said "all" the gaskets will fit. Intake gasket, as mentioned above, is for the smaller ports. The 292 gaskets are iffy for sealing the ports.
John - "The Hoosier Hurricane"
|
|
Group: Forum Members
Last Active: Last Month
Posts: 3.7K,
Visits: 32.6K
|
The intake gaskets for the 239 are a different part# from the 272-292 gasket sets.According to the NAPA online site the part # for 1954 239 engine is FPGMS9243B priced at about $9.00.I find the NAPA online site very handy for checking part#'s and availability.
 
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 15 Years Ago
Posts: 7,
Visits: 8
|
so should i just ask for a gasket for a more common year 292 or whatever whn i go there. all i need right now is an intake gasket for the 239
|
|
Group: Moderators
Last Active: Yesterday
Posts: 3.7K,
Visits: 322.9K
|
All the gaskets for larger Ys fit. The head gaskets are different, and later steel shim gaskets won't seal a water passage and water leaks into the cylinder. The composition gaskets in the NAPA kit will seal.
John - "The Hoosier Hurricane"
|
|
Group: Forum Members
Last Active: 11 Years Ago
Posts: 494,
Visits: 1.0K
|
I get my gaskets from NAPA. Ebay nearly always has gasket sets but I have no idea what the quality is.
Doing Fords for 45 years. '56 Customline Victoria
E.J. in Havana FL
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 15 Years Ago
Posts: 7,
Visits: 8
|
im looking for a good place to buy some quality gaskets for my 239. what all is interchangable with the bigger y blocks ? any help is appreciated
|