|
Group: Forum Members
Last Active: 11 days ago
Posts: 1.2K,
Visits: 20.6K
|
Try using a heat gun to soften the rubber seal,that worked for me. Carl
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 15 Years Ago
Posts: 6,
Visits: 17
|
Thanks.
I got more aggressive with the plate and it came off.
Dave Christensen
57 Tbird
Dave Christensen
Falllbrook CA
57 Tbird
|
|
Group: Forum Members
Last Active: Last Month
Posts: 3.7K,
Visits: 32.6K
|
The only thing holding the plate in place is the bolt.There is a seal behind the plate that may be holding it to the block.Try working a thin blade scraper around the edge of the plate between it and the block.
 
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 287,
Visits: 1.7K
|
someone must have put some kind of glue on it.
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 15 Years Ago
Posts: 6,
Visits: 17
|
How do you remove the plate from the block that a spin on oil filter seals against? I removed the center fastener and cannot get the plate off.
thanks
Dave Christensen
57 Thunderbird
Dave Christensen
Falllbrook CA
57 Tbird
|