Profile Picture

no oil

Posted By sallens 14 Years Ago
You don't have permission to rate!

no oil

Author
Message
sallens
Posted 14 Years Ago
View Quick Profile
Supercharged

Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)

Group: Forum Members
Last Active: 9 Years Ago
Posts: 62, Visits: 421
There seems that no oil is reaching my rockers on one side of my engine it is dry .

can some one help me please as i dont know much about these engines and dont want to damage the engine.i have had both covers off and oil is reaching the other side.

the heads i have are ECZ-G   picture below

the next picture is of the valves

can someone please help on what to do thanks steve


Threaded View

Threaded View
Forum Post no oil By sallens ( 14 Years Ago )
Forum Post Steve: What I would do is loosen the rocker stand bolts about 1/2 to... By Hoosier Hurricane ( 14 Years Ago )
Forum Post JOHN THANKS FOR THE REPLY I HAVE NOW TAKEN THE ROCKER SHAFT OUT AND... By sallens ( 14 Years Ago )
Forum Post Steve, how are you determining there is no oil, is it with engine... By YellowWing ( 14 Years Ago )
Forum Post Assuming you have a center grooved camshaft, the center cam... By Ted ( 14 Years Ago )
Forum Post THANKS TED AND MIKE IT IS THE DRIVERS SIDE THAT HAS NO OIL THE... By sallens ( 14 Years Ago )
Forum Post The plate doesn't slide under the tower. You bolt it in place of the... By charliemccraney ( 14 Years Ago )
Forum Post what then start and run the engine. steve By sallens ( 14 Years Ago )
Forum Post The plate is going to be at least thick enough that it can be tapped... By Ted ( 14 Years Ago )
Forum Post sorry misunderstood now know what you mean steve By sallens ( 14 Years Ago )
Forum Post THANKS FOR ALL THE ADVICE. HAVE NOW TRIED THE GREASE ZERK AND STILL... By sallens ( 14 Years Ago )
Forum Post As a last resort you could get hold of one of the aftermarket kits... By oldcarmark ( 14 Years Ago )
Forum Post Have you removed the distributor and turned the oil pump manually,... By charliemccraney ( 14 Years Ago )
Forum Post IF the cam bearing oil feed hole has closed WHY AM I STILL GETTING... By sallens ( 14 Years Ago )
Forum Post Unfortunately there is no easy fix for this one. As Ted mentioned the... By MoonShadow ( 14 Years Ago )
Forum Post Thought he said it was the drivers side that wasn't getting oil, not... By Bob's 55 ( 14 Years Ago )
Forum Post Isn't Sallens in England or Europe? Left or right hand drive? Stil... By MoonShadow ( 14 Years Ago )
Forum Post Not sure where he's from, don't see it mentioned anywhere. Regardless... By Bob's 55 ( 14 Years Ago )
Forum Post Steve: Just a thought, does you engine have a oil pressure guage? If... By PF Arcand ( 14 Years Ago )
Forum Post THANKS FOR ALL THE HELP SO FAR THE FORUM IS... By sallens ( 14 Years Ago )
Forum Post When I mentioned passenger side rockers losing oil first, I was... By Ted ( 14 Years Ago )
Forum Post Steve, Ted is correct the first thing to determine is what oil... By YellowWing ( 14 Years Ago )
Forum Post steve here thanks yellowwing for the advise so you think it might be... By sallens ( 14 Years Ago )
Forum Post If you can't get the distributor out so you can use a drill to drive... By YellowWing ( 14 Years Ago )
Forum Post I have a similar problem with dist. and firewall. It cant be placed... By 46yblock ( 14 Years Ago )
Forum Post I understand that you are get some oil and by the sounds of it it... By Talkwrench ( 14 Years Ago )
Forum Post Steve . I’ll suggest trying another oil pressure gauge in one of... By Ted ( 14 Years Ago )
Forum Post just a thought if your oil filter is it the old style canister maybe... By shakey pete ( 14 Years Ago )


Reading This Topic

Site Meter