Profile Picture

oil pump

Posted By sallens 14 Years Ago
You don't have permission to rate!
Author
Message
sallens
Posted 14 Years Ago
View Quick Profile
Supercharged

Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)Supercharged (85 reputation)

Group: Forum Members
Last Active: 9 Years Ago
Posts: 62, Visits: 421
i just took my oil pump off my 292 then i took my sump off ; pictures below.

when i took the oil pump off the rubber gromit which is at the end of the supply pipe was broken in half and perished.

could this what has been causing my oil pressure problems and my oil to the rockers??????????

has anybody got one of these gromits they could send to me , i will pay what ever it costs to send .

many thanks

      steve.

THERE WAS SOME BUILD UP OF RESIDUE IN THE PUMP AND THE SUMP HAD SOME TOO.


Threaded View

Threaded View
Forum Post oil pump By sallens ( 14 Years Ago )
Forum Post Steve, PM Me with your address and I will mail one to you. And yes... By YellowWing ( 14 Years Ago )
Forum Post You'll also need a gasket for the pump to the block. An oil pump... By charliemccraney ( 14 Years Ago )
Forum Post I will send the gasket also. By YellowWing ( 14 Years Ago )
Forum Post Steve, If i remember you are from GB. I can send you the rubber and... By nonne_56 ( 14 Years Ago )
Forum Post STEVE HERE AGAIN I JUST FINISHED PUTTING MY OIL PUMP AND SUMP PAN... By sallens ( 14 Years Ago )
Forum Post The quick and easy fix is an external rocker arm oiling kit. I doubt... By awhtx ( 14 Years Ago )
Forum Post Steve . What’s the oil pressure reading? By Ted ( 14 Years Ago )
Forum Post hi ted it does not read much at all. By sallens ( 14 Years Ago )
Forum Post Steve . What weight oil? Even when cold, a light weight oil... By Ted ( 14 Years Ago )
Forum Post TED I AM USING 10/40 WOULD I NEED A CAM BEARING CHANGE, IF SO CAN... By sallens ( 14 Years Ago )
Forum Post Steve . Rod and main bearings can be changed out without... By Ted ( 14 Years Ago )
Forum Post TED WHERE CAN I FIND OUT HOW TO TAKE THE ENGINE APART ( IN WHAT... By sallens ( 14 Years Ago )
Forum Post Steve . Eichmans Y-Block manual is probably as good a reference... By Ted ( 14 Years Ago )
Forum Post what will i need to replace??????? how much would this roughly... By sallens ( 14 Years Ago )
Forum Post Steve, question is bit like,how long is a piece of string?, as Ted... By aussiebill ( 14 Years Ago )
Forum Post Steve . A tear down of the engine will give a better idea of... By Ted ( 14 Years Ago )
Forum Post hi all went out today and put another new oil pressure gauge in and... By sallens ( 14 Years Ago )
Forum Post Steve,
Last year I bought a non-running 1958 F600 with a 292....
By awhtx ( 14 Years Ago )
Forum Post hi all MY MECHANIC HAS NOT WORKED ON Y BLOCKS BEFORE AND CANT... By sallens ( 14 Years Ago )
Forum Post Here is a pic of a 239 yblock which has same oil flow direction as... By marvh ( 14 Years Ago )
Forum Post 10psi will get it to the rockers if it's not blocked and bearing... By charliemccraney ( 14 Years Ago )
Forum Post charliemccraney i have pulled to rockers but cant take the... By sallens ( 14 Years Ago )
Forum Post hi all
MY MECHANIC HAS NOT WORKED ON Y BLOCKS BEFORE AND CANT...
By rick55 ( 14 Years Ago )
Forum Post hi all MY MECHANIC HAS NOT WORKED ON Y BLOCKS BEFORE AND CANT... By sallens ( 14 Years Ago )
Forum Post You can crank the engine over with the starter. Remove the spark... By charliemccraney ( 14 Years Ago )


Reading This Topic


Site Meter