Let's try this out...can't get my video to show up here on the website...

(charley, sorry...tried to follow your instructions. Looks like photobucket has the same thing ...the above text is called their "flash" code for sharing on sites like ours)

ok, here is the link to the video on photobucket...

http://s249.photobucket.com/albums/gg208/danaxjessup/Y%20Block/?action=view&current=100_5776.mp4

EDIT: Charley helped me out, just scroll below! you can see the other two videos if you root around my uploads on there...

The story goes like this: purchased a Mummert blower cam from Jerry Henry. Installed new lifters and said cam last month, been working on projects and decided to button this one up for the display motor. Did the break in period early evening. Minor issues such as an oil pressure gauge that went out on me, stuck on 15 psi or so (thank you, Sunpro), Eastwood header coating burned off a little too much for my liking, oil pan leak I did not expect (crank flange and rear main seal cap dry on this one, go figure), and to top it all off, my JB weld radiator decided to pee all over the floor! What an ending. The cam sounds super, and the engine really responds and will rev pretty high. Didn't want to risk it too much with stock valve train though.

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

Here you go.






Lawrenceville, GA

What are you? Houdini? I have been trying to figure this thing out with the preview button for about a half hour!

I have got to post the video of the radiator springing the leak and spraying water across the garage..

EDIT: just noticed that at the end of the video you helped me with, Charley, that any user can click on one of the three other videos shown, and of course...that leads to the "post break-in video"

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

Sounds good!

   God Bless.   Tim                           http://yblockguy.com/

350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor

tim@yblockguy.com  Visalia, California    Just west of the Sequoias

All I did was copy and paste it.



When I try to do it in internet explorer, it doesn't work. I'm using firefox.


Lawrenceville, GA

Charley, thanks for your help. I dowloaded the latest version of Firefox, but I cannot get the forum to come up on Firefox. The error message says that it may be because I will not accept cookies, but I double checked the settings and made sure I could accept any and all cookies, tried to reload the page, to no avail...go figure.

Any way that you could get the start up video up on there? Here is the flash player embed from Photobucket...

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid249.photobucket.com%2Falbums%2Fgg208%2Fdanaxjessup%2FY%2520Block%2F100_5775.mp4">

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com