I have a 1960 F100 292 that I am trying to do a little at a time with due to money constraints.  I wanted to start with a decent carburetor and then move to the exhaust, heads, then on to tearing down the engine.  I currently have a two barrel carb off of a 302 from a 70's ford torino.  I was hoping to put something else on there.  Is there an Edelbrock carb (500cfm) that would bolt directly to my intake, that would be ready to go as soon as it's bolted on?  I went to the edelbrock site but didn't see anything about the 292 with a two barrel.  Should I get the mummert 4 barrel intake?  If so, what carb could I bolt directly to that that would help my performance.  I read something on one of these forums about how you have to change the distributor with certain carb mods.  Any help with a good set up for my stock engine, would be greatly appreciated.  I would like to get something that would do me good now, but would also be good once I get some good heads, exhaust and a better camshaft.  Any input would be greatly appreciated.  I am not real familiar with anything that will work.