I admit I haven't seen a lot of Y blocks but I've never seen one of these before.

So here's the deal. Bought a supposedly running 312 and auto trans that supposedly came out of a '56 Ford. Motor had the B intake, no carb or dizzy.

Pulled the pan today and found ECZ on main caps. Hadn't really noticed before but it has an approximately 4"x4" flat bracket with 14 holes around the edges sitting horizontally more or less at about a 30 degree angle. It's on the passenger side lower then the head attached to the timing chain cover with a triangular shaped bracket. The generator is attached to the bottom of it. The engine has a three stack pulley system with the generator belt running in the middle pulleys.

AC,power steering, or what????????

Thanks

Missouri Mike

  

I'd rather be lucky than good.................

    but good ain't bad!!