RPM 300 Lobe Center

Posted By MoonShadow 14 Years Ago

You don't have permission to rate!

Author	Message
MoonShadow	Posted 14 Years Ago
Supercharged Group: Forum Members Last Active: Yesterday Posts: 4.6K, Visits: 38.4K	I've measured the lobe center on this cam several times and it comes out at 107deg instead of the 112deg it shows in the specs. Does this mean I have to advance the cam 4 degrees to get it right or what? Chuck in NH Y's guys rule! Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts. MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi) Manchester, New Hampshire
	Reply Quote

Threaded View

RPM 300 Lobe Center By MoonShadow ( 14 Years Ago )

The cam was supposed to have a 112deg lobe center. Since I run a... By MoonShadow ( 14 Years Ago )

Chuck, I'd be callin Isky or ask Ted if that's where you got... By pegleg ( 14 Years Ago )

How did you measure it? Oldmics By Oldmics ( 14 Years Ago )

Tim, Thats exactly the way I'm doing it but with a few more... By MoonShadow ( 14 Years Ago )

Chuck, We may be (I may) confusing the termanology here.... By pegleg ( 14 Years Ago )

[quote]I guess my question is will this cam be ok to run on my 292... By pegleg ( 14 Years Ago )

Chuck . I believe you’re talking ‘intake lobe centerline’... By Ted ( 14 Years Ago )

[quote] Set the way you have it would be good for the low end but it... By pegleg ( 14 Years Ago )

Yup, You're right. But you also don't need a lot of duration on the... By pegleg ( 14 Years Ago )

Looks like Ted was typing the same time I was. lol By mctim64 ( 14 Years Ago )

Ted, why number 6? When I started with the advance at 0deg I was... By MoonShadow ( 14 Years Ago )

[quote][b]MoonShadow (8/1/2011)[/b][hr]Ted, why number 6?[/quote]... By Ted ( 14 Years Ago )

[quote] On some cam grinders out there, this is highly... By pegleg ( 14 Years Ago )