• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• RPM 300 Lobe Center

RPM 300 Lobe Center

Posted By MoonShadow 14 Years Ago

You don't have permission to rate!

Post Reply

RPM 300 Lobe Center

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Threaded View

Threaded View

I've measured the lobe center on this cam several times and it comes... By MoonShadow ( 14 Years Ago ) RE: RPM 300 Lobe Center By Richard Head ( 14 Years Ago ) The cam was supposed to have a 112deg lobe center. Since I run a... By MoonShadow ( 14 Years Ago ) RE: RPM 300 Lobe Center By pegleg ( 14 Years Ago ) RE: RPM 300 Lobe Center By Oldmics ( 14 Years Ago ) Degree wheel and micrometer. Measured it many times and it came out... By MoonShadow ( 14 Years Ago ) RE: RPM 300 Lobe Center By mctim64 ( 14 Years Ago ) Tim, Thats exactly the way I'm doing it but with a few more... By MoonShadow ( 14 Years Ago ) RE: RPM 300 Lobe Center By pegleg ( 14 Years Ago ) Let me ask it this way, If the Lobe Centerline is reading 107deg. with... By MoonShadow ( 14 Years Ago ) [quote]I guess my question is will this cam be ok to run on my 292... By pegleg ( 14 Years Ago ) RE: RPM 300 Lobe Center By Ted ( 14 Years Ago ) RE: RPM 300 Lobe Center By mctim64 ( 14 Years Ago ) [quote] Set the way you have it would be good for the low end but it... By pegleg ( 14 Years Ago ) [quote][b]pegleg (8/1/2011)[/b][hr]Tim, I think you want to close the... By mctim64 ( 14 Years Ago ) Yup, You're right. But you also don't need a lot of duration on the... By pegleg ( 14 Years Ago ) RE: RPM 300 Lobe Center By mctim64 ( 14 Years Ago ) Ted, why number 6? When I started with the advance at 0deg I was... By MoonShadow ( 14 Years Ago ) [quote][b]MoonShadow (8/1/2011)[/b][hr]Ted, why number 6?[/quote]... By Ted ( 14 Years Ago ) Thanks everyone! I think I've got it. I'll double check everything on... By MoonShadow ( 14 Years Ago ) [quote] On some cam grinders out there, this is highly... By pegleg ( 14 Years Ago )

Post Reply

Back To Top

Reading This Topic