Ohh by the way.. pics when finished Mark, we all wanna see it !



"Came too close to dying to stop living now!"

Thanks Paul.I  think I have it figured out.The "L" bracket goes on the rear on the lower quarter panel.the flat one goes on the front w/o lip.What threw me off was my buddys 56 that has the brackets reversed and his "L"bracket has an extra bend in it.According to the fellow I bought these skirts and brackets from late in 56 Ford went to a different supplier for the brackets and some vehicles did have different style brackets."Talkwrench" has the earlier style which are the same as the ones I am using.Having trouble getting the flat ones in exactly the right location.Got a couple of elongated holes now to shift the bracket a little.Also using new rubber which makes it tight getting the skirts in position.

  

Mark.............Without removing them from the car,I can't be sure,but it looks as if I welded a little piece of metal to them to move the bracket toward the canter of the car.This was done to both brackets.I hope this makes sense to you.

 

Paul,

Boonville,MO

Mark..........I'll take a look after I get home from work tomorrow.It's been 6 or 7 years since I put these brackets on the car,so obviously my old brain has completely forgotten what I did to make them work.I do remember that the template that came with the brackets was useless.

 

Paul,

Boonville,MO

Just looking at Macs and Dennis Carpenter.The brackets they sell have the extra bend in them which is what mine dont have.Paul-what did you do to make yours fit if they were like the ones I have now?

  

Ah Rick! I thought you were going to give me some answers to my problem.Never mind the batbrain with the phone!

  

Another idiot trying to sell some piece S#%t phone. Once they get their hooks into you, they don't let go.
I don't know how the mods can stop these morons.
Regards

edit:  Actually working on blocking the IP address.  In the meantime, I'm taking another approach.  Ted.

Rick - West Australia
Do Y Blocks Downunder run upside down? Gravity Sucks!!

Thanks Rob.My problem is the front bracket.The "base"is too long which is maybe what Paul is talking about.My buddys 56 has an extra bend in that bracket so it fits between the lip and that piece that meets the rocker panel in front of the wheel opening.Is that the bracket you had to modify Paul and what did you do?Just to be sure I am using the correct bracket in the right place-the flat bracket is for the rear of the skirt?Correct?Thanks!

  

Mark hope these pics help. Guess you have to be careful as you dont want the 'hooks" to far down, you need them in such a place when you hook the "handle bar" on it has a bit of tension on it when it hooks up an over the lip of the skirt. The front arm just goes into the hook, you bring the rear up into position , it will hang down a little till you get the the "handle bar" over the hook and as you bring it up it lifts the last bit of the skirt and thats where the little bit of tension is and then hook it [the handle bar]over the lip of the skirt...locked.. done! These are pics from right side only. Would really help if you had it on a hoist and with wheels off.

Rob.



"Came too close to dying to stop living now!"

Mark I'll go out when I get home and take some pics for you to see if that will help.

Rob.



"Came too close to dying to stop living now!"