does anyone besides bendsten's make a kit to install a aod to 292

Gary Croan in CA (Bristol Service Company) make a conversion I believe. Might check with Mummert.

My Bendsens works well, but poor customer service if you have a question-especially for the price!

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

Did anyone ever figure out if the gear drive adapter on their starter is a production model for something else? The starter body is a standard import and is used on the scrub. Its the adapter to the Y-block that is keeping me from finding one locally. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

I just talked to Mummert and he doesn't have a kit for the aod

Wilcap...good product and good service

You might give Gary Croan a shout.  He’s in Costa Mesa, CA and can be reached at ph:949-722-1122.

Lorena, Texas (South of Waco)

Howdy,





I am pretty happy with my Bendtsen adapter.







Yes it is (was) expensive. (isn't everything?)



I did ask him what starter it is but I cannot for the life of me remember what he said it was....If you call him he'll tell you.





Regards,





Rick


-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!

---------------------
This post was created using OpenSuSE Linux x64 and Firefox

I think it's a Mitsubishi style Chevy starter without that attachment plate. same bendix atleast.


Hyvinkää, FI

I failed to mention that the above Bendtsen kit pictured, IS the AOD + Y-block kit!



It just also happens to work with an E4OD too!!



You have to do a little tiny bit of grinding for the starter gear to clear a spot on the inside of bell-housing.



The entire mess complete with Mummert Rams is going in my 55 F-600!!



I'm getting the radiator re-cored this week and I've removed the cab so I can start building the engine & trans mounts and get ready to sand blast the frame!



Finally some progress!!













Thanks for that!!





I seem to remember he did say Mitsubishi but I didn't remember which engine it was for. He did say I could buy it at any "regular" autoparts store





Cheers,





Rick






-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!

---------------------
This post was created using OpenSuSE Linux x64 and Firefox

It is the same starter as the Mitsubisi high tourqe that is available for the scrubs. I checked to see if the starter was available without the adapter but couldn't find it. Mitsubisi didn't help. You can buy replacement parts for everthing so I suppose one could be made up. Otherwise buy the scrub part and remove the adapter. Then its a bolt in the the Bendtsen adapter. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire