Hello all folks, and thanks again for all answer in my first topic about the engine.

I also need a new distributor, like msd or mallroy, or any other good choice

So my question is which one is a good choice, and where can i buy it??

i also need a oil pan, but can´t find anyone for sale on the internet, where can i buy it???

 

have a nice day to all y-block people in US

I've seen both items on Ebay. The distributors are not cheap though.

Dan      Kingman Az.      86409

We have a parts source here in the US for rebuilt truck distributors. Autozone or NAPA both carry them for fairly reasonable prices. Under $70 US last time I  looked.

Frank/Rebop

Bristol, In ( by Elkhart) 

Before you go spending money on a distributor  what are you building?A stock motor or hi-po or?As far as an oil pan I am sure someone here would have a good used one to sell.Try posting a "wanted" in classified.

  

I have oil pans for sale,both truck and car,also if you need a MSD dist. i could get you one at Jegs and ship everthing together.I think the MSD is around $400.00 at Jegs   Carl

http://www.classiccars.se/classic/p_detalj.asp?txtLopnr=25927&txtVar=1

Here you have one in Sweden, check it out.

I bought the MSD 8383 and it is perfect on my 292.

Bernt, South Sweden. 1956 Victoria 2 Door Hardtop

ok so the msd will be the best chioce of  msd vs. mallory?

I've used them both but the Mallory electronic does not have a vacume advance. I think the MSD would be better for street use. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire