hey guys. I am hoping that you can tell me what i got. I bought a 4bbl manifold off of ebay and was advertised as a ecz-9425-b. when I got it, the first thing i did was verify that it was a B manifold and it is but here is where it gets bewildering. the carb mounting flange does notlook  like the holley type carb spacer. it looks like the teapot flange. is it possible to have a b manifold with a teapot carb flange?

I'm afraid there is also an ECB-9425-B that has the teapot base. At the passenger side of the carb base is a good sized opening for the choke?????

Use a wire brush on the part number lettering and re-check the last letter of the prefix.

Maybe if incorrectly listed - you might return it?????  

 
 Steve Metzger       Tucson, Arizona

ya. it's a ecb not a ecz. not gonna return it. prolly just get a adapter. where can i get one at that goes from the teapot to the modern holley.

Is the F-Code intake a unique casting or a B intake machined differently?


Lawrenceville, GA

The F code is EDB-D, used only on the supercharged engines.  It has both bolt patterns on it.

John - "The Hoosier Hurricane"

64f100 - Check out Speedway Motors p/n 1351935B - $20

Just make sure you smooth up the edges under the throttle blades when you mount everything.

 
 Steve Metzger       Tucson, Arizona

GREENBIRD56, I'm liking your new Avatar. Looks kinda like Mr. Horsepower (Clay Smith Cams http://claysmithcams.com/) but GREEN!!!

"The Master Cylinder"

Enjoying life at the beach in SOCAL

Oops!  F code is EDB-F, not D.  D is the head designation.  Brain fade.  Old timers.  Sorry.

John - "The Hoosier Hurricane"

thanks for the help guys. Ya know, I posted the same question on here and on ford-trucks.com and you are the only ones who responded and gave me help.  thanks again. you guys are the greatest. now i just needto find a 1.08 autolite 4100 to go one this intake.

1964; If the intake isn't what was advertised, I don't know why you are not asking to return it? You can register a complaint with e bay if refused.. looking for an Autolite carb, try a Mustang club, or if you want a rebuilt, try Pony Carburetors in N.Y. state. However, they like to get a core or they charge extra..

Paul