I'm in the middle of converting my 55 fairlane from 6v to 12, all is complete with one major exception, I installed a 12 volt ignitor and no response when I turn the key , I have red to pos and blk to negative and I have what is supposed to be a wire from the ignition switch attached to the positive side of the coil. The 6v ignitor had a wire that had to be ran to the battery, this diagram doesn't show anything like that. Also changed the solenoid switch to 12 volt and just assuming it wires up the same way. Anyone have a trouble shooting guide to go by to identify the problem?

All input would be appreciated.

Claim to fame is the car was used as an extra in the movie Diner with Micky Rourke, Steve Gootenburg, Paul Riser and Kevin Bacon.