272 Bore question

Posted By xupadito 13 Years Ago

You don't have permission to rate!

Author	Message
xupadito	Posted 13 Years Ago
Hitting on all eight cylinders Group: Forum Members Last Active: 12 Years Ago Posts: 8, Visits: 73	Does anybody know if i can use one of these size of pistons on a 272 Y-block? 3.81" +.060 from 292 CID 3.86" +.060 from 312 CID I`ve seen a stroker kit called "310 cu in kit for 272 blocks" and I`m trying to figure out what the trick is Thanks
	Reply Quote

Threaded View

272 Bore question By xupadito ( 13 Years Ago )

reading this [url=http://ford-y-block.com/displacement.htm] page... By nglshbiker ( 13 Years Ago )

I think Mummert's kits are pistons, rods and crank. Chuck By MoonShadow ( 13 Years Ago )

[quote][b]aussiebill (8/12/2012)[/b][hr][quote][b]xupadito... By aussiebill ( 13 Years Ago )

The only way to know is have the block sonic checked for wall... By Glen Henderson ( 13 Years Ago )

John Mummert advertises a 310 CID kit and a 322 Cid kit for 272... By Cactus ( 13 Years Ago )

People says 272 and 292 blocks are the same, so I was thinking I... By xupadito ( 13 Years Ago )

i bored a 272 .040 over 292.i wouldnt think twice about boring a 272... By 314 ( 13 Years Ago )