My control valve was leaking on my 1956 so I bought seals from Concours and proceed to make a pile of parts on my bench. With the shop manual as a coach, it was fairly straightforward. Much to my surprise I found two seals on each side of the barrel valve (that seemed like a bad omen). Anyway I was able to test it today and it seems that one side is still leaking as it's dripping from under the control ball. The outboard side seems dry. I've got it draining and my plan to verify that I put the inner seal in the correct way.

What have you guys done in the past with leaking control valves?



Thanks

Jeff

Jeff Petersen