|
Author
|
Message
|
|
Ted
|
|
|
Group: Administrators
Last Active: Yesterday
Posts: 7.4K,
Visits: 205.6K
|
Y block Billy (3/19/2013)
I swear I didnt hit the button twice, but there is double post.Billy. I deleted your duplicate post as well as a couple of others that were in this thread. YBF members should have the capability of deleting / editing their own posts with this new software. Look at the upper right of your post and you should see the Edit and Delete buttons for your post.
  Lorena, Texas (South of Waco)
|
|
|
|
|
texkbc
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 18,
Visits: 673
|
thanks
|
|
|
|
|
Y block Billy
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 1.6K,
Visits: 5.2K
|
I swear I didnt hit the button twice, but there is double post.
 55 Vicky & customline 58 Rack Dump, 55 F350 yard truck, 57 F100 59 & 61 P 400's, 58 F100 custom cab, 69 F100, 79 F150, 82 F600 ramp truck, 90 mustang conv 7 up, 94 Mustang, Should I continue?
|
|
|
|
|
Y block Billy
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 1.6K,
Visits: 5.2K
|
Timing cover gaskets are the same.
55 Vicky & customline 58 Rack Dump, 55 F350 yard truck, 57 F100 59 & 61 P 400's, 58 F100 custom cab, 69 F100, 79 F150, 82 F600 ramp truck, 90 mustang conv 7 up, 94 Mustang, Should I continue?
|
|
|
|
|
texkbc
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 18,
Visits: 673
|
Is the timing cover gasket the same for car and truck? thanks
|
|
|
|
|
Hoosier Hurricane
|
|
|
Group: Moderators
Last Active: 6 hours ago
Posts: 3.7K,
Visits: 322.8K
|
The solenoid IS a relay. It is all you need.
John - "The Hoosier Hurricane"
|
|
|
|
|
texkbc
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 18,
Visits: 673
|
Hoosier Hurricane (3/18/2013)
To relocate the dipstick, knock the plug from the block (from the bottom side) and install the truck dipstick tube. Use the oil pickup that's in the truck pan. Your local parts store should be able to get gaskets. If your truck already has a starter solenoid on the inner fender or firewall, it will energize the starter. If it's been removed, your local parts store can supply one. The passenger water pump will bolt to the truck cover.the starter solenoid was taken from the truck so I am trying to figure out what all I need on the starter system. Is this just the solenoid or is there any type of relay?
|
|
|
|
|
texkbc
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 18,
Visits: 673
|
thanks
|
|
|
|
|
Hoosier Hurricane
|
|
|
Group: Moderators
Last Active: 6 hours ago
Posts: 3.7K,
Visits: 322.8K
|
To relocate the dipstick, knock the plug from the block (from the bottom side) and install the truck dipstick tube. Use the oil pickup that's in the truck pan. Your local parts store should be able to get gaskets. If your truck already has a starter solenoid on the inner fender or firewall, it will energize the starter. If it's been removed, your local parts store can supply one. The passenger water pump will bolt to the truck cover.
John - "The Hoosier Hurricane"
|
|
|
|
|
texkbc
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 18,
Visits: 673
|
So I can use the car water pump on the truck cover? I pulled the truck pan, cover and front mounting bracket off of my 292 today. Just need to get them cleaned up and put on the 272. Where is a good place to buy gaskets for this engine? So I need to relocate the dip stick and oil pickup. Should I use the oil pickup tube from the truck motor?
Also I need to figure out what solenoid I need with this starter. Can someone please advise?
thank you
|
|
|
|