Finally started the process to change the transmission. First step, pull the engine. So while I have the engine out, I plan to do a few things. Replace freeze/ expansion plugs, I already had to replace one. Round out the oil pick-up at the pump, I replaced the oil pump and the pick-up had been dinged in previously. While I have the pan off, check the bearings, not to mention figure out if I have 292 or 312.Current engine condition, runs great, doesn't smoke, oil consumption hasn't been an issue, biggest thing is low oil pressure at idle when hot, as in after driving 100 miles.
I have thought about putting a mild cam in, but have to admit, it's more about the sound than the power.

Thanks,
Don