|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 53,
Visits: 1.2K
|
According to this write up: http://home.comcast.net/~simplyconnected/59Ford/EngineParts/Block/BlockAssembly/default.htm"The two outer head bolts go through a water jacket, and must be properly sealed." Is this true??
_____
Billerica, MA
|
|
Group: Moderators
Last Active: 10 hours ago
Posts: 6.1K,
Visits: 442.5K
|
I've never checked, but I believe that is incorrect and all of the head bolt threads are blind tapped. I've not used any sealant on any head bolts, and no leaks yet.
Lawrenceville, GA
|
|
Group: Forum Members
Last Active: Last Year
Posts: 479,
Visits: 10.9K
|
Must think he's building a Ch**y.
Dan Kingman Az. 86409
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 53,
Visits: 1.2K
|
Ok great, cause I didn't use any sealant. Just wanted to make sure. Thanks!
_____
Billerica, MA
|
|
Group: Administrators
Last Active: 7 hours ago
Posts: 7.4K,
Visits: 205.6K
|
Charlie is correct in that all the head bolt holes are blind meaning they don’t see coolant. But be sure to lube the threads during assembly so that the bolts torque more accurately when tightening them.
  Lorena, Texas (South of Waco)
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 53,
Visits: 1.2K
|
Thanks for the tip Ted. I did use oil.
_____
Billerica, MA
|