Profile Picture

Cooler with expansion or level of the water in the radiator?

Posted By SwedKarla 12 Years Ago
You don't have permission to rate!

Cooler with expansion or level of the water in the radiator?

Author
Message
SwedKarla
Posted 12 Years Ago
View Quick Profile
Turbocharged

Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)Turbocharged (70 reputation)

Group: Forum Members
Last Active: 9 Years Ago
Posts: 30, Visits: 265
Is it better to have a cooling system with expansion? With the expansion as well be cooler be filled right up to the cap. But if you have an expansion tank without straw in the bottom of the well, the pressurized cap sitting on the expansion. But if you have a straw in the expansion tank, make sure that you have a water level of this so it sucked air into the cooling system. Here you can easily have pressurized cap on the radiator. Thinking I right here? Normally you should well water level to be about 10-15 mm above the cells in the top of the radiator when you do not have the expansion. Abundance is pushed out.

Drives: Mercury Montclair 1957th

www.mercury1957.com



Reading This Topic


Site Meter