Hi Low brake pedal but brakes work. brakes adjusted & bleed. Pedal about 2 inches from floor. Removed rubber seal under dash to watch pushrod and master. new pushrod with about 1/16 play. When i press the brake pedal the piston moves in with very little resistance for over 1/2 inch. then as pedal gets closer to floor pedal brake pressure gets better. I thought the pressure should be high right away. But if the master was leaking 1 would have no pedal. The car does not have good stopping power nor will the pedal pump up at all. I did not work on car. it is the way i got it. New shoes and brake cylinders. Thanks for any input.