intake gaskets Question

Posted By mikhett 12 Years Ago

You don't have permission to rate!

intake gaskets Question

Author	Message
mikhett	Posted 12 Years Ago
Supercharged Group: Forum Members Last Active: 12 Years Ago Posts: 24, Visits: 122	Im switching out a 2 bbl intake and going with a 4 bbl.Should i glue down the gaskets or install dry? Which are best Felpro,Victor???Thanks
	Reply Quote

Threaded View

Threaded View

Forum Post

intake gaskets Question By mikhett ( 12 Years Ago )

Forum Post

Haha... You will probably get 100 different answers to the one.... By The Master Cylinder ( 12 Years Ago )

Forum Post

I use that style of gasket too, think it might have been from Best.... By Talkwrench ( 12 Years Ago )

Forum Post

I use a very thin coat of rtv around the coolant passage, dry... By charliemccraney ( 12 Years Ago )

Forum Post

I`m with Master Cylinder. I use a thin coat off grease, because you... By yblockpinto312 ( 12 Years Ago )

Forum Post

These gaskets seal very well, no need for sealer of any kind. Master... By speedpro56 ( 12 Years Ago )

Forum Post

what Charlie said. By pegleg ( 12 Years Ago )

Forum Post

Normally grease, but I have been known to coat them with Pipe dope... By Y block Billy ( 12 Years Ago )

Reading This Topic