|
Author
|
Message
|
|
HT32BSX115
|
|
|
Group: Forum Members
Last Active: 2 Weeks Ago
Posts: 452,
Visits: 24.4K
|
Hey guys,
Just got the flanges from John M! Just what Doctor ordered! about $14 each + shipping!
Now to get pipe and start welding!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!
---------------------
This post was created using OpenSuSE Linux x64 and Firefox
|
|
|
|
|
HT32BSX115
|
|
|
Group: Forum Members
Last Active: 2 Weeks Ago
Posts: 452,
Visits: 24.4K
|
thundercat (9/4/2014)
The flanges were not listed on his site. But I asked when I purchased manifolds on 8-4-2014 . They were on my receipt on a separate line with no part # .. the pair was 25.00 ..They are 3/8" thick and nicely made ..
Well,
Well, I relented!!
I called John today and ordered 2 flanges!
Thanks!
Rick
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!
---------------------
This post was created using OpenSuSE Linux x64 and Firefox
|
|
|
|
|
HT32BSX115
|
|
|
Group: Forum Members
Last Active: 2 Weeks Ago
Posts: 452,
Visits: 24.4K
|
thundercat (9/4/2014)
The flanges were not listed on his site. But I asked when I purchased manifolds on 8-4-2014 . They were on my receipt on a separate line with no part # .. the pair was 25.00 ..They are 3/8" thick and nicely made ..
Hey thanks!
I am going to give him a call !!
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!
---------------------
This post was created using OpenSuSE Linux x64 and Firefox
|
|
|
|
|
thundercat
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 124,
Visits: 5.2K
|
The flanges were not listed on his site. But I asked when I purchased manifolds on 8-4-2014 . They were on my receipt on a separate line with no part # .. the pair was 25.00 ..They are 3/8" thick and nicely made ..
Mars , Pennsylvania
|
|
|
|
|
HT32BSX115
|
|
|
Group: Forum Members
Last Active: 2 Weeks Ago
Posts: 452,
Visits: 24.4K
|
thundercat (9/3/2014)
I recently purchased a set of Johns manifolds and he sold me a set of flanges to go with them.. The I.D. is 2.135" for 2" I.D. exhaust tubing..
I looked on his site and didn't find them. Do you have a link for them?
Glad to see that he has them now!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!
---------------------
This post was created using OpenSuSE Linux x64 and Firefox
|
|
|
|
|
62bigwindow
|
|
|
Group: Forum Members
Last Active: Last Year
Posts: 884,
Visits: 14.3K
|
I bought a set from Speedway and they have the flanges with them.
Durham Missouri
|
|
|
|
|
thundercat
|
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 124,
Visits: 5.2K
|
I recently purchased a set of Johns manifolds and he sold me a set of flanges to go with them.. The I.D. is 2.135" for 2" I.D. exhaust tubing..
Mars , Pennsylvania
|
|
|
|
|
stuey
|
|
|
Group: Forum Members
Last Active: Last Month
Posts: 442,
Visits: 3.8K
|
if you are using Mummert ram horns 2" may be adequate but there will be a step in the wrong direction. please check.
I found these they may help http://spdexhaust.com/2BoltB.html
stuey
|
|
|
|
|
HT32BSX115
|
|
|
Group: Forum Members
Last Active: 2 Weeks Ago
Posts: 452,
Visits: 24.4K
|
Thanks Ted!
That's exactly what I was looking for!
I had to make my own flanges as I could not find any 2 bolt on 3" centres.
good luck with the project
stuey
Yeah. I too am going to make my own flanges. Sure wish John offered them for the manifolds.........
Still haven't decided if I'll use SS or mild steel. I have a 6"x8" 3/8" thick piece of SS plate. and I'm setting up a template to cut them with my plasma cutter.
Because I'm using side mounts welded to the frame, I have to make a rather tight turn coming out of the flange.
More to come!
Rick
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally!
---------------------
This post was created using OpenSuSE Linux x64 and Firefox
|
|
|
|
|
Ted
|
|
|
Group: Administrators
Last Active: Yesterday
Posts: 7.4K,
Visits: 205.4K
|
See if this link to a past thread helps. http://forums.y-blocksforever.com/FindPost56358.aspx
  Lorena, Texas (South of Waco)
|
|
|
|