Dual exhaust with Rams Horns

Posted By HT32BSX115 11 Years Ago

You don't have permission to rate!

Author	Message
HT32BSX115	Posted 11 Years Ago
Supercharged Group: Forum Members Last Active: 2 Weeks Ago Posts: 452, Visits: 24.4K	Howdy all, I'm getting ready to make up my exhaust system using ceramic coated Rams Horns on my largely stock 292. Does anyone think I need to use exhaust pipe larger than 2" (like maybe 2 1/4" ) from the manifolds to the mufflers and back? Thanks, Rick ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1955 F-600/272/E4OD// Disclaimer: No animals were injured while test driving my F-600 except the ones I ran over intentionally! --------------------- This post was created using OpenSuSE Linux x64 and Firefox
	Reply Quote

Threaded View

Dual exhaust with Rams Horns By HT32BSX115 ( 11 Years Ago )

Hi Rick If you are using Mummerts ram horns check the outlet diam.... By stuey ( 11 Years Ago )

See if this link to a past thread helps.... By Ted ( 11 Years Ago )

[quote][b]Ted (9/3/2014)[/b][hr] See if this link to a past... By HT32BSX115 ( 11 Years Ago )

if you are using Mummert ram horns 2" may be adequate but there will... By stuey ( 11 Years Ago )

I bought a set from Speedway and they have the flanges with them. By 62bigwindow ( 11 Years Ago )