• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Can I install front coils with no motor in the car?

Can I install front coils with no motor in the car?

Posted By oldcarmark 16 Years Ago

You don't have permission to rate!

Post Reply

Can I install front coils with no motor in the car?

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
oldcarmark	Posted 16 Years Ago
Supercharged Group: Forum Members Last Active: Last Month Posts: 3.7K, Visits: 32.6K	I have the motor and transmission out to rebuild the motor.Can I install new coils while I have the engine out?Is there sufficient vehicle weight to put the springs back in?
	Reply Quote

Threaded View

Threaded View

Can I install front coils with no motor in the car? By oldcarmark ( 16 Years Ago ) Cage the springs with a good spring compressor. Its a lot easier... By crenwelge ( 16 Years Ago ) Thanks.Doing the bushings and installing my disc brake setup is part... By oldcarmark ( 16 Years Ago ) I redone the front suspension with no motor and trans,it did not have... By junkyardjeff ( 16 Years Ago ) Jeff! You were able to do this without compressing the springs?There... By oldcarmark ( 16 Years Ago ) I put the floor jack under the lower controll arm to remove and... By junkyardjeff ( 16 Years Ago ) There is a nice tool for opening the ball joints - its a long "double... By GREENBIRD56 ( 16 Years Ago ) Hi Steve! Your tool sounds similar to what Ford used originally to... By oldcarmark ( 16 Years Ago ) [quote][b]AZ28 (11/22/2009)[/b][hr]There is a nice tool for opening... By oldcarmark ( 16 Years Ago ) When using the pickle fork breaking the balljoint loose, do not take... By speedpro56 ( 16 Years Ago ) Springs are very dangerous. Back in the 50's and 60's there were... By crenwelge ( 16 Years Ago ) Before unloosing any tension on the spring, wrap a chain through one... By paul2748 ( 16 Years Ago ) If you don't have the time or expertise to make a ball joint removal... By rick55 ( 16 Years Ago ) Hello Rick! I had a look at that tool.Looks similar to the one Steve... By oldcarmark ( 16 Years Ago )

Post Reply

Back To Top

Reading This Topic