I'm finally gettin her back together and i'm praying to possibly turn her over on Friday, my birthday. BUT I have a few more problems I need kinked out



1-Tranny Lines

2-Wiring

3-Dipstick Tube

4-Random hole in block



1- On the bottom of the radiator There are 3 spouts. One on the right(passenger side) is for the drain cock, the one in the middle i've figured goes to the passenger side of the Fordomatic (Right by the entrance of the dipstick tube. But the one on the left, I HAVE NO CLUE!!! It looks like it's supposed to go somewhere on the Drivers side, but i'm not sure. I still have the line, but when i hook it up, there's nowhere for the back end to connect to. ANyone know about this????



2- Wiring- Of course, with like the tranny, I had friends helping me out. They wrote down the wiring in a little book, AND LOST IT!!!

What i'm trying to figure is the wiring for the little pin thing (For the lighting i'm 95% confident). It's located on the front of the driver side fender and is about 2 inches long with various pins that are supposed to go in it.



3- I have still yet to find the TRUE LENGTH of the dipstick. I lost mine and don't want to under/over fill the tranny when i break the motor in. Anyone have the CORRECT measurements for it. I have a spare 350TH dipstick i'll just cut to fit.



4- There's a hole in the block on the passengers side, roughly 6" from the starter, right in the middle of the side of the block. I HAVE NO CLUE what this is for, what it went to.



Any help would be greatly appreciated. HOPING TO HAVE IT RUNNIN FRIDAY, WILL IF ALL THESE QNAS ARE ANSWERED


William



1957 Ford Fairlane 500

292 Bored .30 over

Fordomatic