T5 Trans

Posted By Dave V 15 Years Ago

You don't have permission to rate!

Author	Message
Dave V	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 2 Months Ago Posts: 234, Visits: 41.4K	I know there has been a lot of discussion about T5 transmissions behind Y blocks. I am wondering though if the trans tunnel needs to be modified on a 56 Victoria. Also will the shifter be located far enough in front of the seat for decent shifting and is there also an offset shifter kit available. Thanks. Dave. SE Wis
	Reply Quote

Threaded View

T5 Trans By Dave V ( 15 Years Ago )

I put a T5 in my '56 Customline Victoria and the trans tunnel did not... By Rono ( 15 Years Ago )

I appreciate the info Rono. I was mainly concerned about the tunnel... By Dave V ( 15 Years Ago )

Just finished putting a T-5 in my 56 Merc and I must say it fit... By petew ( 15 Years Ago )

It's good to hear that it will go in with out any drama as you put it... By Dave V ( 15 Years Ago )

I purchased the adapter and clutch from Mr. Mummert. I don't like the... By petew ( 15 Years Ago )

Could it perhaps be the original clutch disc from the Mustang T5... By Dave V ( 15 Years Ago )

Yes, I believe that if you use the original pressure plate with a 5.0... By petew ( 15 Years Ago )

Dave; For what it is worth, I went with a Centerforce Clutch and... By Rono ( 15 Years Ago )

The stock 5.0L Mustang pressure plate will not fit the Y-Block... By John Mummert ( 15 Years Ago )

Gerald, I'm not smart enough to figure how to post the picture here... By petew ( 15 Years Ago )