Dual Quad Throttle Bellcrank

Posted By easyissy 15 Years Ago

You don't have permission to rate!

Author	Message
easyissy	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 11 Years Ago Posts: 182, Visits: 767	I installed the Ford 2x4 intake and a pair of Edelbrock 500cfm carbs on my '58 Fairlane with a 292. The throttle bellcrank no longer fits do I replace it with a throttle cable? If so, what about the trans kickdown on my Fordomatic? Can I replace the kickdown rod for a cable as well? Sorry if these sound like dumb questions by I'm a novice mechanic. All help is greatly appreciated. 58 Ford Custom 300 - San Pedro, CA (So-Cal)
	Reply Quote

Threaded View

Dual Quad Throttle Bellcrank By easyissy ( 15 Years Ago )

If you’re talking about the T-Bird bellcrank that is bolted between... By Ted ( 15 Years Ago )

Thanks Ted. I was referring to the bellcrank that mounts to the... By easyissy ( 15 Years Ago )

Easyissy; I also have a pair of Edlbrock 500 cfm(#1404) carbs on my... By Rono ( 15 Years Ago )

Thanks Rono for the ideas. Is this what you're using? (Lokar) Could... By easyissy ( 15 Years Ago )

Yes, I'm using the cable pull type gas pedal set-up on my '56... By Rono ( 15 Years Ago )

Photos would help alot and any tuning tips you could give me on... By easyissy ( 15 Years Ago )

Here are a couple of pics of my throttle linkage set-up. As far as... By Rono ( 15 Years Ago )

There are basically 2 general types of dyno testing; Engine Dyno and... By Rono ( 15 Years Ago )

Sounds like there is binding somewhere. Disconnect the cable from the... By Rono ( 15 Years Ago )

It looks to me like you simply need more leverage at the pedal. Either... By Philo ( 15 Years Ago )

The reason for the 2 springs is because of my progressive set-up. 1... By easyissy ( 15 Years Ago )