Profile Picture

Repair 312 block bottom hole half gone starter side?

Posted By moose19sk 15 Years Ago
You don't have permission to rate!

Repair 312 block bottom hole half gone starter side?

Author
Message
moose19sk
Posted 15 Years Ago
View Quick Profile
Hitting on all eight cylinders

Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)Hitting on all eight cylinders (9 reputation)

Group: Forum Members
Last Active: 14 Years Ago
Posts: 9, Visits: 54
Is there a way to repair the broken off piece lower hole in the block lower starter bolt hole. Don't have the piece. Thanks Steve

Threaded View

Threaded View
Forum Post Repair 312 block bottom hole half gone starter side? By moose19sk ( 15 Years Ago )
Forum Post Is any part of the tab left? Sometimes a long bolt washer and nut can... By MoonShadow ( 15 Years Ago )
Forum Post Thanks for the reply there is about half of the threads showing on the... By moose19sk ( 15 Years Ago )
Forum Post Here are a couple more options. Build up the broken end... By Ted ( 15 Years Ago )
Forum Post Steve Is it possibe to use a piece of sheet metal like a later engine... By Pete 55Tbird ( 15 Years Ago )
Forum Post How would a redneck from Indiana do it? Cut a 5/16 nut in half, stick... By Hoosier Hurricane ( 15 Years Ago )
Forum Post Thanks everyone for the idea's will make something work. Was thinking... By moose19sk ( 15 Years Ago )
Forum Post Steve: I welded a stud on my truck, and starter installation is... By Hoosier Hurricane ( 15 Years Ago )
Forum Post My 56 came with the stud welded in on my car and it works fine. Must... By Ol'ford nut ( 15 Years Ago )
Forum Post Does someone want to make a recommendation on what type of welding... By PF Arcand ( 15 Years Ago )
Forum Post Does someone want to make a recommendation on what type of welding... By PF Arcand ( 15 Years Ago )
Forum Post Paul: I used Nirod 55, reverse DC arc weld. The weld amounts to... By Hoosier Hurricane ( 15 Years Ago )
Forum Post Paul, We rednecks use a high nickel rod. You are correct, you... By pegleg ( 15 Years Ago )
Forum Post After thinking about this, I re-read the original post. The starter... By Hoosier Hurricane ( 15 Years Ago )
Forum Post Sorry about that it's the bottom hole on the block passenger side. Not... By moose19sk ( 15 Years Ago )
Forum Post Yes, the bellhousing bolts to it. It is a 7/16 bolt, right? Same... By Hoosier Hurricane ( 15 Years Ago )


Reading This Topic

Site Meter