Cam and lifter questions

Posted By scott5560 14 Years Ago

You don't have permission to rate!

Author	Message
scott5560	Posted 14 Years Ago
Supercharged Group: Forum Members Last Active: 12 Years Ago Posts: 66, Visits: 354	Anyone with any Shnieder cam experience? Has anyone used the Schnieder 256F profile cam? My 292 (C2AE) lifters look fine but is it totally taboo to reuse them with a new cam? Must they break in together? Comp cams has a lifter set for the y-block has anyone used them with another cam?
	Reply Quote

Threaded View

Cam and lifter questions By scott5560 ( 14 Years Ago )

[quote][b]scott5560 (2/24/2011)[/b][hr]Anyone with any Shnieder cam... By Ted ( 14 Years Ago )

I am so down on the offshore junk being peddled these days that I... By crenwelge ( 14 Years Ago )

I just got a set of lifters back resurfaced by... By glrbird ( 14 Years Ago )

Mike I don't have the instrument to measure the hardness, but there... By glrbird ( 14 Years Ago )

[quote][b]yblockpinto312 (2/25/2011)[/b][hr]Tim: Ted: The more I read... By Ted ( 14 Years Ago )

Did anybody mention you have to run with a restrictor plate at... By pintoplumber ( 14 Years Ago )

Getting back to the lifter and hardness question; It's my... By Rono ( 14 Years Ago )

Y-Guy Dennis: You really know how to "wake" everyone up on a... By yehaabill ( 14 Years Ago )

Let's see if I can remember each question. First I would say a... By mctim64 ( 14 Years Ago )

I should add another plug for http://www.oregoncamshaft.com/ ,... By mctim64 ( 14 Years Ago )

Here's a couple of pix. the "steel" ones have a thin looking base... By mctim64 ( 14 Years Ago )

Tim. Thanks for posting the pictures of the two lifter types.... By Ted ( 14 Years Ago )

Re the "FoMoCo" or "cursive Ford oval" trademarks, that was an... By Dennis K. ( 14 Years Ago )

[quote][b]Ted (2/28/2011)[/b][hr] Tim. Thanks for posting the... By aussiebill ( 14 Years Ago )

Tim are you running the steel lifters with todays cams with no... By speedpro56 ( 14 Years Ago )