Profile Picture

Replacing Rear Oil Seal on '59 292

Posted By MDYblocker 14 Years Ago
You don't have permission to rate!
Author
Message
MDYblocker
Posted 14 Years Ago
View Quick Profile
Hitting on all eight cylinders

Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)Hitting on all eight cylinders (20 reputation)

Group: Forum Members
Last Active: 13 Years Ago
Posts: 20, Visits: 79
Greetings. I'm new to the forum. I'm just beginning the process of replacing the rear main oil seal. The oil pan is off and as I look at the two bolts on the rear main, it looks like they won't clear the lip to which the oil pan attaches, or is it just my imagination?



thanks,

Randy in Maryland

'59 Ford Galaxie Town Sedan

Threaded View

Threaded View
Forum Post Replacing Rear Oil Seal on '59 292 By MDYblocker ( 14 Years Ago )
Forum Post Hi, welcome to the forum. Have you scraped off the pan gasket? Look... By Barry L ( 14 Years Ago )
Forum Post [quote][b]MDYblocker (7/20/2011)[/b][hr]Greetings. I'm new to the... By aussiebill ( 14 Years Ago )
Forum Post The main cap bolts are close to the rear seal retainer but do... By Ted ( 14 Years Ago )
Forum Post Is there another panel I need to remove, or is removing the oil pan... By MDYblocker ( 14 Years Ago )
Forum Post ?? Do you mean the inspection plate ? its only a few bolts take it off... By Talkwrench ( 14 Years Ago )
Forum Post I removed the plate, which revealed the torque converter, but saw that... By MDYblocker ( 14 Years Ago )
Forum Post Looks like I have to grind down a socket to be paper thin to loosen... By MDYblocker ( 14 Years Ago )
Forum Post If like mine [292] should be a 3/8 12 point socket, if you can get a... By Talkwrench ( 14 Years Ago )
Forum Post Sounds good. Thanks. By MDYblocker ( 14 Years Ago )
Forum Post Yes, I'm moving slowly, but I'm getting there. I removed the oil seal... By MDYblocker ( 14 Years Ago )
Forum Post STOP!! why are you touching the main BEARING cap ? your just doing the... By Talkwrench ( 14 Years Ago )
Forum Post [quote][b]Talkwrench (7/27/2011)[/b][hr]STOP!! why are you touching... By aussiebill ( 14 Years Ago )
Forum Post The torque on the main bolts isn’t expected to be much over 100... By Ted ( 14 Years Ago )
Forum Post It has a rope seal. I'm replacing it with a neoprene seal. I suspect... By MDYblocker ( 14 Years Ago )
Forum Post i've just been playing with a newly built Y and had to release the... By stuey ( 14 Years Ago )
Forum Post Why dont you just try screwing a long scew into it and pull it out... By Talkwrench ( 14 Years Ago )
Forum Post Got the bolts loose on the main bearings. I did them all. I like the... By MDYblocker ( 14 Years Ago )
Forum Post Major success! Put a screw in the old rope seal and clamped a small... By MDYblocker ( 14 Years Ago )
Forum Post Did the job, put it together, started it up.....oil leaked. Ninety... By MDYblocker ( 14 Years Ago )
Forum Post When you get to pulling it apart let us know what you find, may give... By Talkwrench ( 14 Years Ago )
Forum Post Randy . Sure hate to hear that the oil leak is still there.... By Ted ( 14 Years Ago )
Forum Post [quote][b]Ted (8/4/2011)[/b][hr] Randy . Sure hate to hear that... By aussiebill ( 14 Years Ago )
Forum Post I'm pretty confident the rope seal came out cleanly. I was turning the... By MDYblocker ( 14 Years Ago )
Forum Post [quote][b]MDYblocker (8/4/2011)[/b][hr]..... What would be the... By Ted ( 14 Years Ago )
Forum Post Thanks for the picture, Ted. I hope to get back to the car this week.... By MDYblocker ( 14 Years Ago )
Forum Post It took over 2 weeks for my online order from Napa to arrive. I... By MDYblocker ( 14 Years Ago )
Forum Post Make sure it's not coming from the cam plug. By charliemccraney ( 14 Years Ago )
Forum Post Tell me where to look for the cam plug? Do I have to drop the pan? If... By MDYblocker ( 14 Years Ago )
Forum Post You don't have to drop the pan. It is on the back of the block,... By charliemccraney ( 14 Years Ago )
Forum Post Randy Wherre are you at in Maryland? Oldmics/Glen Burnie By Oldmics ( 14 Years Ago )


Reading This Topic


Site Meter