can you run your pcv hose to the center plug in the manifold?  I am thinking of running tri power and just want to make sure I have a place for my pcv.

tom in iowa

54 Merc wagon

54 sunvalley

I run mine in the intake port behind the front carb on my Edelbrock 573. Found a brass 90 degree nipple at the hardware store. Trimmed the hose barbed end enough to so I could thread it into the manifold.

57 Black Tbird 312/auto

I have the offy 3x2 and run the PCV to the port also with a 90* fitting behind the front carb as well. Aside from a cracked PCV line that had me chasing my tail there is no real issue.

Mike Rizzo

1963 F100 "Rudy"

Daniel Island, SC

That's where I'm running mine also.

Dan      Kingman Az.      86409

Here’s a link to a past discussion.

http://www.y-blocksforever.com/forums/Topic3221-3-1.aspx

Lorena, Texas (South of Waco)

my hole what everyone is using for there pcv, on my elelbrock 573 manifold is being used for my brake servo

can i put a tee peice in the hose?????????

and run both

              steve