my hole what everyone is using for there pcv, on my elelbrock 573 manifold is being used for my brake servo

can i put a tee peice in the hose?????????

and run both

              steve

Here’s a link to a past discussion.

http://www.y-blocksforever.com/forums/Topic3221-3-1.aspx

Lorena, Texas (South of Waco)

That's where I'm running mine also.

Dan      Kingman Az.      86409

I have the offy 3x2 and run the PCV to the port also with a 90* fitting behind the front carb as well. Aside from a cracked PCV line that had me chasing my tail there is no real issue.

Mike Rizzo

1963 F100 "Rudy"

Daniel Island, SC

I run mine in the intake port behind the front carb on my Edelbrock 573. Found a brass 90 degree nipple at the hardware store. Trimmed the hose barbed end enough to so I could thread it into the manifold.

57 Black Tbird 312/auto

can you run your pcv hose to the center plug in the manifold?  I am thinking of running tri power and just want to make sure I have a place for my pcv.

tom in iowa

54 Merc wagon

54 sunvalley