Profile Picture

Replacement exhaust valves

Posted By PF Arcand 12 Years Ago
You don't have permission to rate!

Replacement exhaust valves

Author
Message
PF Arcand
Posted 12 Years Ago
View Quick Profile
Supercharged

Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)Supercharged (5.3K reputation)

Group: Forum Members
Last Active: Last Year
Posts: 3.3K, Visits: 238.8K
Can't remember where I saw or heard it, but it was stated that early 351 Windsor exhaust valves will fit Y-Blks & have slightly oversize, 1.54" heads. Is that correct? And what defines "early" engines. Thanks.

Paul

Threaded View

Threaded View
Forum Post Replacement exhaust valves By PF Arcand ( 12 Years Ago )
Forum Post Yes, the C heads on my spare 292 have 1.84 and 1.54 351W valves. I... By slick56 ( 12 Years Ago )
Forum Post Mctim has a youtube video installing windsor valves. I would think... By 62f250 ( 12 Years Ago )
Forum Post The intakes wouldn't help me as my spare heads are ECZ-G's. I haven't... By PF Arcand ( 12 Years Ago )
Forum Post Paul, my book shows '69-'74 351 W valves to be the early ones. They... By Hoosier Hurricane ( 12 Years Ago )
Forum Post John: Thanks for the early Windsor exhaust valve manufacturing dates.... By PF Arcand ( 12 Years Ago )
Forum Post Paul, my book (NAPA June '78) does not list any 368 valves available... By Hoosier Hurricane ( 12 Years Ago )
Forum Post Link to Tim doing 351w valves... By slick56 ( 12 Years Ago )
Forum Post I had an exhaust valve break in a 352 i did a ring and bearing rebuild... By 62f250 ( 12 Years Ago )
Forum Post Does Mummert have them? By pegleg ( 12 Years Ago )
Forum Post O.K: Finally found the Mctim video referring to 351 Windsor valves..... By PF Arcand ( 12 Years Ago )
Forum Post Maybe mctim will chime in or send he an email through his site and he... By 62f250 ( 12 Years Ago )
Forum Post Am I missing something? Are replacement Y Block valves no longer... By Hoosier Hurricane ( 12 Years Ago )
Forum Post John: I was hoping to use factory 351 exhaust valves to replace old... By PF Arcand ( 12 Years Ago )
Forum Post John: In Mctims you tube follow up he states, "you can use 351 valves... By PF Arcand ( 12 Years Ago )
Forum Post Can you paste the link to the follow up YouTube video? Tia. By slick56 ( 12 Years Ago )
Forum Post Paul: 429 and 460 valves are the same. By Hoosier Hurricane ( 12 Years Ago )
Forum Post Paul: I tried to edit the above post, but got an error message. I... By Hoosier Hurricane ( 12 Years Ago )
Forum Post Slick: If you go to the video you sent me to. (thanks) Then just... By PF Arcand ( 12 Years Ago )
Forum Post Thanks Paul. I think Tim was referring to the 351 Cleveland valves, in... By slick56 ( 12 Years Ago )
Forum Post Slick: On re reading the question from Brazil & Mctim's response you... By PF Arcand ( 12 Years Ago )
Forum Post Hi Paul, confusion reigns! I have just had a look at the C heads with... By slick56 ( 12 Years Ago )
Forum Post Slick '56: From your measurements, it appears that the valve springs... By Hoosier Hurricane ( 12 Years Ago )
Forum Post This engine wasn't run that way for long!! It has a new cross... By slick56 ( 12 Years Ago )
Forum Post Slick & John: Thanks for your efforts. Still trying to get my thick... By PF Arcand ( 12 Years Ago )
Forum Post .09 is 9 hundredths. That is about 3/32", quite a big difference. By charliemccraney ( 12 Years Ago )
Forum Post My mental calculating isn't what it used to be, but I think that's 90... By ian57tbird ( 12 Years Ago )
Forum Post I stand corrected gentlemen, they're 90 thousands or 3/32" shorter..... By PF Arcand ( 12 Years Ago )
Forum Post Paul, the original Y-Block valves are commonly listed as 5.090" OAL.... By John Mummert ( 12 Years Ago )
Forum Post Thanks J.M. for the clarifications.. That takes the 351W exhausts idea... By PF Arcand ( 12 Years Ago )


Reading This Topic

Site Meter