Profile Picture

FMX/Fordomatic Article

Posted By Carls56 17 Years Ago
You don't have permission to rate!

FMX/Fordomatic Article

Author
Message
Carls56
Posted 17 Years Ago
View Quick Profile
Normally aspirated

Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)Normally aspirated (25 reputation)

Group: Forum Members
Last Active: 6 Years Ago
Posts: 25, Visits: 55
      I have a 56 Ford with a 292 and Fordomatic.My starter ring needs replacing ,so I thought I would try the FMX/Fordomatic conversion.I can not find the article.

      Do you guys have a link to it? And would you advice the conversion.Thanks,Carl

 

 

I wanted to add this also.I found someone that has a fmx, he says was bolted a 351W and he will give me the yoke.Does it matter what FMX I use?


Threaded View

Threaded View
Forum Post FMX/Fordomatic Article By Carls56 ( 17 Years Ago )
Forum Post Carl: This was on the old site, but I cannot find it either. In a... By Hoosier Hurricane ( 17 Years Ago )
Forum Post Thanks so much for your reply.I think I will tell the guy I... By Carls56 ( 17 Years Ago )
Forum Post I pulled my converter off to see what I have.It looks like a 17.... By Carls56 ( 17 Years Ago )
Forum Post 2 Things One if you use the FMX tail shaft the speedometer cable and... By Gerry ( 17 Years Ago )
Forum Post Gerry,Could you give me a link or price for that starter? I just... By Carls56 ( 17 Years Ago )
Forum Post Hi-Test in Santa Ana California 714-540-9600 The web site is still... By Gerry ( 17 Years Ago )
Forum Post You can if your FOM has a one-way clutch in the middle of the... By Hoosier Hurricane ( 17 Years Ago )
Forum Post Carl, I tried to e-mail and pm you thru this site, neither would work.... By webconst ( 17 Years Ago )
Forum Post Thanks,I will try to email you at that address.Carl By Carls56 ( 17 Years Ago )
Forum Post Well.................Last week I traded for a 302 and trans... By Carls56 ( 16 Years Ago )
Forum Post What can you expect to gain from the FMX versus the original tranny?... By rexbd ( 16 Years Ago )
Forum Post Rexbd: Unless you are going to have a high horsepower engine and... By Hoosier Hurricane ( 16 Years Ago )
Forum Post I can get the FOM rebuilt and upgraded for around $700. Seems like a... By rexbd ( 16 Years Ago )
Forum Post Rexbd: Sounds like the sensible solution. I doubt if you'll ever... By Hoosier Hurricane ( 16 Years Ago )
Forum Post Getting the fordomatic to perform the 123 shift pattern I assume... By rexbd ( 16 Years Ago )
Forum Post Yes. You will have to drill and tap the case in the correct location... By Hoosier Hurricane ( 16 Years Ago )


Reading This Topic

Site Meter