• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• How to? brake power booster

How to? brake power booster

Posted By Talkwrench 15 Years Ago

You don't have permission to rate!

Post Reply

How to? brake power booster

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
Talkwrench	Posted 15 Years Ago
Supercharged Group: Forum Members Last Active: 4 Years Ago Posts: 898, Visits: 23.2K	Another one guys , I bought one of those power booster kits a while back, any tips on fitting those. I have the dual circuit master cylinder and need a diagram of where the brake lines should go. this is for drums all round... Cheers! "Came too close to dying to stop living now!"
	Reply Quote

Threaded View

Threaded View

How to? brake power booster By Talkwrench ( 15 Years Ago ) This is easy. Look at the frame behind the left front wheel. You will... By Ol'ford nut ( 15 Years Ago ) The only thing I would ad is bench bleed the master before hooking up... By oldcarmark ( 15 Years Ago ) Guys can I just check about which lines go where at the master cyl. I... By Talkwrench ( 15 Years Ago ) Don't guess. Usually the larger reservoir is for the front brakes.... By charliemccraney ( 15 Years Ago ) Both resovoirs are the same size because this is a Corvette style with... By oldcarmark ( 15 Years Ago ) I also have the master from Dave. I also have the GM proportioning... By YellowWing ( 15 Years Ago ) Thanks guys . Like you Mark I have had to trim the brackets to get it... By Talkwrench ( 15 Years Ago ) I drilled the pedal in the car.Put down a cloth to collect the chips... By oldcarmark ( 15 Years Ago ) [quote][b]Talkwrench (12/20/2010)[/b][hr]Any tips for undoing the... By charliemccraney ( 15 Years Ago ) my guess is if you have a duel drum brake master cyl. it should have a... By shakey pete ( 15 Years Ago ) My firewall had a bunch of holes from a couple different master... By YellowWing ( 15 Years Ago ) [quote]I've heard them called Line nut wrenches and flare nut... By rick55 ( 15 Years Ago ) When I ordered the kit from Old Irish Dave I asked the question ; It... By Talkwrench ( 15 Years Ago ) My buddy with a 55 with drum brakes used this booster/master setup... By oldcarmark ( 15 Years Ago ) Yep haven't forgotten what you said about the "hardlines' to the... By Talkwrench ( 15 Years Ago ) I just edited my last post as you were posting yours.I think I... By oldcarmark ( 15 Years Ago ) Always helpfull Mark... I thought about doing the loops, but thought... By Talkwrench ( 15 Years Ago ) Rob, I'm running much the same system as you with no prolems. No need... By rick55 ( 15 Years Ago ) The suggested coils in the line are not so much for heat but more to... By oldcarmark ( 15 Years Ago ) AGHHHhhh!! Im not having joy from this.... the lines that I have had... By Talkwrench ( 15 Years Ago ) They shouldn't require much to seal. Resist the urge to strip threads... By charliemccraney ( 15 Years Ago ) It has been frustrating and Im aware it shouldn't take much to seal. I... By Talkwrench ( 15 Years Ago ) I tried the brake light switch in that "special" fitting and could not... By oldcarmark ( 15 Years Ago ) Mark I bought a length of tube and just made my own lines, then took... By Talkwrench ( 15 Years Ago ) They may be too soft which is part of the problem.I guess I just take... By oldcarmark ( 15 Years Ago )

Post Reply

Back To Top

Reading This Topic